Providing Solutions in Plastics

  1 888 768 5759

Request wholesale pricing »

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
TOTAL: $ 0 (0 Items)

 MouseOver to Zoom.


UHMW TUBE - NATURAL

Ultra High Molecular Weight Polyethylene



 4 stars based on 8 Review(s)
Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Measure Twice, Cut Once

Once we cut a stock size piece, we can't ever sell it as full size piece again. All cuts are nominal. So, PLEASE MEASURE CAREFULLY, and DOUBLE CHECK YOUR MEASUREMENTS BEFORE YOU ORDER. The old adage is espcially true here: measure twice, cut once. WE do it before we cut your piece, and YOU should do it before you order.

Using a measuring tape

Here's a little refresher on how to use a measure tape. First, let's talk about the increments. We'll assume that you're using the English or Imperial system of feet and inches. Extend your tape measure several inches and find the large 1 and 2. On most English measuring tape, the smallest increment is 1/16 of an inch. This means that there are 16 equally spaced marks between 1 and 2 inches on the tape. When measuring, count how many of these marks you are beyond the nearest inch. If your piece measures 7 inches and other 8 marks, that is 8/16 (1/2) for a total of 7-1/2".Let's say you were taking your second measurement (see below) and this time you counted 9 marks past the 7 inch mark. That means your piece is actually 7-9/16" long.

The clip on the end of my measuring tape slides back and forth. Is it broken?

No! The sliding clip on the end of the tape is designed for two different types of measurements. When you take an outside measurement (where you hand the clip of the tape over an edge), the clip slides out a little to account for the thickness. When you take an inside measurement (push the clip up against a surface), the clip slides in, again accounting for its thickness. The measuring tape self-adjusts so, either way, you get an accurate measurement.

 inches


Total Price: $88.33
 inches
 ft

The minimum length for this tube is 10 feet. We have rounded the length.
Please call us at 1 888 768 5759 for special length.


Overview Specs & Uses Reviews Inquiry
UHMNE - Overview

UHMW polyethylene is an outstanding choice in material when you need a relatively low cost abrasion, impact, and chemical resistant material. UHMW is used in extreme wear situations such as hopper liners, conveyer systems, marine fender pads, and sand and gravel movement. UHMW is not UV stabilized and will have a shortened life if used outdoors. For outdoor situations, use IPX UHMW as an alternative.

Sold in ten foot increments but may be cut for UPS.



Features
[PDF Spec Sheet]

NOTE: ALL TUBES COME SUFFICENTLY OVERSIZED ON THE OD DIMENSION AND SUFFICENTLY UNDERSIZED ON THE INSIDE DIMENSION TO ALLOW FOR MACHINING TO SIZE LISTED

• Meets USDA and FDA 3-A dairy guidelines

• Custom colors available

• No cold embrittlement, works from -155ºF to + 200ºF

• Impervious to marine borers and barnacle resistant

• Extremely high abrasion resistance

• Outstanding impact strength, even at low temperatures

• Extremely low coefficient of friction

• Self-lubricating

• Easily machined with common woodworking tools

• Great chemical resistance

NEED A UHMW SAMPLE?
Machinable Plastics Material Sample Pack
Impact Strength Material Sample Pack
Friction Resistance Material Sample Pack




Resources
About Us
Privacy Policy
Terms and Conditions
Advanced Search
Need Help?
Contact Us
FAQ
Shipping & Returns
Sitemap
Contact Information
Phone: 1 888 768 5759
330 Commerce Circle
Sacramento, CA 95815
nicole.g@interstateplastics.com
Career