100 results displayed - Please filter results using the menu above or the search bar. |
Title
| Description | |
| Molded UHMW roll end bearings.
 |  |
|
| Molded four bolt flange bearings with an oil-filled UHMW insert, FDA/USA approved.
|  |
|
| Molded solid pillow block bearings made from UHMW, FDA approved.
|  |
|
| Molded two bolt flange bearings with an oil-filled UHMW insert.
|  |
|
| Wear resistant flange bushings made from food grade nylon. FDA Approved.
|  |
|
| A cylindrical bushing with MD-filled Nylon, available in a variety of sizes.
 |  |
|
| A cylindrical bushing with MD filled Nylon, available in a variety of sizes.
|  |
|
| Nylon thrust washers are wear resistant and extend part life.
|  |
|
| Low friction, wear resistant oil-filled nylon bearing insert.
|  |
|
| Medium duty oil-filled and low friction machined split pillow block bearings made from nylon.
|  |
|
| Solid pillow block bearings made from oil-filled nylon are durable and wear resistant.
|  |
|
| Split wall bearings made from natural UHMW or oil-filled food grade nylon with a 5" max bore.
|  |
|
| Two bolt flange bearings made from oil-filled nylon have great load bearing capability.
|  |
|
| Four bolt flange bearings made from oil-filled nylon have great load bearing capability.
|  |
|
| Nylon split collars have low friction properties and can withstand harsh chemicals and high heat.
|  |
|
| Nylon shaft collars offer decreased wear and the ability to operate in high heat conditions.
|  |
|
| Delrin/acetal shaft collars have low friction and high mechanical strength, rigidity, and stability.
|  |
|
| Nylon split static shaft bushings have good wear resistance.
|  |
|
| Shaft collars made from reprocessed UHMW are used in less demanding applications than virgin.
|  |
|
| UHMW Flange Bearing Inserts (Standard Duty)
|  |
|
| Sleeve Bushing - High Temperature, Cylindrical, Spec Polymer. Multiple materials available.
|  |
|
| Flange Bushings - High Temperature, Spec Polymer.
| |
|
| Natural UHMW split static shaft bushings.
| |
|
| UHMW roll end bearing inserts excel in corrosion-sensitive applications.
|  |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW solid pillow block bearings are low friction and corrosion resistant.
| |
|
| Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications.
|  |
|
| Standard duty UHMW roll end bearings excel in corrosion-sensitive applications.
| |
|
| Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications.
| |
|
| Natural UHMW wall bearings have low coefficient of friction.
| |
|
| Machined two bolt flange UHMW bearings.
| |
|
| Machined four bolt flange UHMW bearings.
|  |
|
| Machined UHMW discs 1 1/4" thick with a 9" diameter.
|  |
|
| Race Way UHMW Chain Guide, 2040 ANSI chain.
|  |
|
| Extruded coil wear strips are made from 1/8" thick UHMW and are 50 ft. in length.
|  |
|
| Pressure sensitive UHMW tape.
|  |
|
| Type R UHMW Belt Guides are engineered to match round belts for the longest life and performance pos
|  |
|
| Long life and high performance Type V UHMW belt guide for V-belts.
| |
|
| Type T UHMW chain guide. #100 ANSI chain.
|  |
|
| Type TD UHMW chain guide, double strand. #25-2 ANSI chain.
| |
|
| Type U UHMW chain guide. #25 ANSI chain.
| |
|
| Type K UHMW chain guide, #25 ANSI chain.
| |
|
| UHMW Can Line Cable Pulleys.
|  |
|
| Reprocessed UHMW filler WWT wear strips.
|  |
|
| Reprocessed UHMW starter WWT wearstrips.
| |
|
| 5.5" wide reprocessed UHMW wearshoes (carrying).
|  |
|
| Reprocessed UHMW wearshoes (single hole return).
| |
|
| Reprocessed UHMW wearshoes (double hole return).
| |
|
| UHMW radius curve wear strips with low friction properties.
|  |
|
| UHMW tracks with a tab design - 90 degree corners.
|  |
|
| UHMW track with a bevel design and 90 degree corners.
| |
|
| UHMW tracks with a tab design - 90 degree corners.
| |
|
| UHMW tracks with a carrying bevel design - 90 degree corners.
| |
|
| UHMW tracks with a return bevel design - 90 degree corners.
| |
|
| Tongue and groove wear strips available in UHMW and oil-filled nylon options.
|  |
|
| Molded spur gears made from acetal. Meets AGMA standards and is food contact safe.
|  |
|
| Oil-filled nylon spur gears offer longer part life, less operating noise, and lighter weight than me
|  |
|
| Oil-filled nylon gear racks have longer life and decreased operating noise over standard gear racks.
|  |
|
| Oil-filled nylon gear racks have longer life and decreased operating noise over standard gear racks.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
|  |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
|
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| V-belt sheaves for type "A" belts are machined from UHMW for high performance and long life.
|  |
|
| V-belt sheaves for type "B" belts are machined from UHMW for high performance and long life.
| |
|
| UHMW flat belt pulleys have low friction and extend part life.
|  |
|
| High performance, long part life 1/4" round belt UHMW pulleys.
|  |
|
| High performance, long part life 3/8" round belt UHMW pulleys.
| |
|
| High performance, long part life 1/2" round belt UHMW pulleys.
| |
|
| Acetal roller chains for close-tolerance applications.
|  |
|
| FDA compliant no. 25 food grade nylon roller chain sprockets.
|  |
|
| FDA compliant no. 35 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 40 food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 50 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 60 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 80 oil-filled food grade nylon roller chain sprockets.
| |
|
| Stub shafts made from black nylon have wear resistance, rigidity, and dimensional stability.
|  |
|
| Nylon roller chains have low friction and high creep, impact, and abrasion resistance.
| |
|
| Polypropylene roller chains are recommended for lower load requirement applications.
| |
|
| Mill sprockets made from reprocessed UHMW.
|  |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Agricultural sprockets made from reprocessed UHMW.
| |
|
| Agricultural sprockets made from reprocessed UHMW.
| |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Mill sprockets made from reprocessed UHMW.
| |
|
| Agricultural sprockets made from reprocessed UHMW.
| |
|
