100 results displayed - Please filter results using the menu above or the search bar. |
Title
| Description | |
| Acetal AF blend has excellent sliding/friction/wear properties.
 |  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
 |  |
|
| Acetal is a tough, stable engineering thermoplastic.
|  |
|
| Black acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic.
 |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin plastic and delrin black (delrin sheet) bridge the gap between metals and plastic.
|  |
|
| Acetal copolymer. Good wear properties low friction acetal plastic sheet.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin vs Acetal - Delrin sheets and Delrin plastic offer an excellent balance of properties.
|  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use.
|  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Dupont? Vespel® polyimide: a high temperature, creep resistant material.
|  |
|
| Dupont? Vespel® high-performance polyimide.
|  |
|
| NorPLY 1002 uses non-woven parallel filaments to reduce filament stress & increase its fatigue life. |  |
|
| NorPLY 1002 epoxy composite is used to make components for fatigue-intensive applications. |  |
|
| Our line of outrigger and jack pads will exceed your requirements.
|  |
|
| Nylatron GSM PA6 (nylon blue) should be considered for any oil-filled Nylon application.
|  |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. |  |
|
| Black Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet. |  |
|
| Nyloil rod offers great toughness, dimensional stability, wear resistance, and versatility.
|  |
|
| An internally lubricated cast nylon 6 sheet with high strength and reduced friction properties. |  |
|
| Self-lubricating cast nylon tube with improved dimensional stability over standard cast nylon. |  |
|
| Gray tubular nylon bars available for use in various applications.
|  |
|
| Solid nylon rod has a good combination of toughness, wear resistance, and versatility.
|  |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. |  |
|
| Nylon 66 rod in MD grade is tough, dimensionally stable, wear resistant, and versatile.
|  |
|
| Nylon stock, nylon plate, and nylon products are tough, dimensionally stable & wear resistant.
|  |
|
| Nylon has a combination of toughness, dimensional stability, wear resistance, and versatility. |  |
|
| Food grade nylon is self lubricating. Nylon food grade nylon rod is approved for food contact.
|  |
|
| Nylon tubes and nylon bar have a good combination of toughness and wear resistance.
|  |
|
| Tough, dimensionally stable extruded nylon bushing stock with good wear resistance and versatility. |  |
|
| Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet.
|  |
|
| Hydlar Z nylon PA66 rod is an abrasion resistant plastic with great wear properties. |  |
|
| Hydlar Z nylon PA66 sheets are abrasion resistant plastic sheets with great wear properties. |  |
|
| Nylatron 703XL PA6 provides an extraordinary amount of control for high precision applications. |  |
|
| Nylatron NSM nylon stands up to demanding applications, perfect when larger size parts are required.
|  |
|
| Nylatron NSM is considered better than cast nylon rod and nylon rod stock for large part sizes.
|  |
|
| Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts. |  |
|
| Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts. |  |
|
| Cast nylon XHA is heat stabilized for use in higher temperature applications than standard nylon. |  |
|
| Cast nylon XHA is better suited for higher temperature applications than unmodified cast nylon. |  |
|
| Torlon is the highest performing melt processable plastic. It has superior resistance to heat.
|  |
|
| With its superior heat resistance, Torlon is the highest performing melt processable plastic.
|  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
|  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
|  |
|
| Ultem 1000 offers high strength and excellent resistance to flame and heat.
|  |
|
| Black PEEK rods suitable for PEEK machining and outdoor use.
 |  |
|
| Black PEEK sheets suitable for PEEK machining, PEEK bushings, and various applications. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
|  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
|  |
|
| Unfilled natural PEEK tube has very good resistance to chemicals, abrasion, and wear. |  |
|
| Bearing grade PEEK HPV has the lowest coefficient of friction (COF) of all PEEK grades. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
|  |
|
| A lightweight and strong material, PET plastic is commonly used to package foods. |  |
|
| An internally lubricated thermoplastic polyester providing enhanced wear and inertness.
|  |
|
| PET is a strong and lightweight plastic that is widely used for packaging foods.
|  |
|
| Of the phenolic sheet grades, CE grade phenolic sheet is considered 'electrical' grade. |  |
|
| Of the phenolic sheet grades, CE grade phenolic rod is considered 'electrical' grade. |  |
|
| "C" Grade Natural Canvas Phenolic Sheet
|  |
|
| LE phenolic rods have excellent electrical properties that regular linen phenolic rods do not. |  |
|
| Natural LE Phenolic Sheet.
|  |
|
| Natural Paper Phenolic Sheet - Economy
|  |
|
| Techtron HPV PPS has outstanding chemical resistance, great wear resistance, and is flame retardant. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals. |  |
|
| PTFE rods resist heat and chemicals. PTFE block is used for low friction applications.
|  |
|
| PTFE rod (polytetrafluoroethylene) for low friction applications. Compare to Teflon sheet and rod.
|  |
|
| PTFE sheeting and Teflon PTFE sheet are used in extremely low friction applications.
|  |
|
| PTFE sheet and PTFE Teflon sheet are low friction. PTFE sheets resist heat, chemicals, & corrosion.
|  |
|
| PTFE tubing has the lowest coefficient of friction of any plastic and allows build-up free flow.
|  |
|
| Self-lubricating engineered thermoplastic turcite kit.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Virgin grade black UHMW rod stock has good wear, chemical, & impact resistances. |  |
|
| Black uhmw sheet, virgin grade, for general purpose use. |  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| IPX 2000 is an advanced, engineered polyethylene that has greater benefits than standard UHMW.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
|  |
|
| UHMW angles are an economical way to reduce the abrasion of metal parts & extend part life. |  |
|
