Specifications
| Property | Units | ACRYLIC CAST Search | |||||||||||||||||
| Water Absorption (Saturation) | % | - | |||||||||||||||||
| Tensile Strength (73 F) | PSI | 9,000 | |||||||||||||||||
| Flexural Strength (73 F) | PSI | 14,000 | |||||||||||||||||
| Compressive Strength (10% Deflection) | PSI | 16,000 | |||||||||||||||||
| Shear Strength (73 F) | PSI | - | |||||||||||||||||
| Impact Strength, Notched Izod (73 F) | Ft-Lbs/In. | - | |||||||||||||||||
| Elongation at Break (73 F) | % | 2 | |||||||||||||||||
| Tensile Modulus of Elasticity (73 F) | PSI | 425,000 | |||||||||||||||||
| Flexural Modulus of Elasticity (73 F) | PSI | 425,000 | |||||||||||||||||
| Hardness - Rockwell & Burnell (73 F) | Various Scales | M90 | |||||||||||||||||
| Density | Lbs/In | 0.044 | |||||||||||||||||
| Coefficient of Friction (Dynamic) | None | - | |||||||||||||||||
| Wear Factor (K) | in. -min/Ft-Lbs-Hr | - | |||||||||||||||||
| Limiting PV | PSI/FPM | - | |||||||||||||||||
| Abrasion Resistance Index | None | - | |||||||||||||||||
| Coefficient of Linear Thermal Expansion | In./In./F | 4.5 x 10-5 | |||||||||||||||||
| Continuous Service Temperature - in Air (max.) | F | 190 | |||||||||||||||||
| Deflection Temperature (264 PSI) | F | 80 | |||||||||||||||||
| Melting Point | F | - | |||||||||||||||||
| Deformation Under Load (2000 PSI, 122 F) | % | - | |||||||||||||||||
| Dielectric Strength | Volts/Mil | 400 | |||||||||||||||||
| Volume Resistively | Ohm-CM | 1 x 10-16 | |||||||||||||||||
| Dielectric Constant (1 kHz) | None | 3.5 | |||||||||||||||||
| Dielectric Constant (1 MHz) | None | 3 | |||||||||||||||||
| Dielectric Constant (60 Hz) | None | 4 | |||||||||||||||||
| Specific Gravity | None | - | |||||||||||||||||
| Coefficient of Linear Thermal Expansion (-40 F to 300 F) (E-831) | None | 4.5 x 10-5 | |||||||||||||||||
| Heat Deflection Temperature @ 264 psi (D648) | F | ||||||||||||||||||
| Vicat Softening Point (D1525) | F | ||||||||||||||||||