Providing Solutions in Plastics

   (888) 768-5759

Request wholesale pricing »

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
TOTAL: $0 (0 Item)

UHMW TUBE - NATURAL
 MouseOver to Zoom.






You Might Also be Interested In

UHMW ROD - NATURAL VIRGIN

UHMW SHEET - BLACK REPROCESSED

UHMW-PE SHEET - ANTI-STATIC

UHMW ROD - BLACK REPROCESSED

UHMW TUBE - NATURAL

Ultra High Molecular Weight Polyethylene



 4 stars based on 12 Review(s)
Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

1.) Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
2.) Measure your space by counting the increments beyond the nearest inch. (If your space measures 7 inches plus 8 tick marks, that is 8/16 à 1/2. Your space is 7-1/2" on one side.)
3.) Another example: If your space is 7 inches and 9 marks past that, your material should be 7-9/16".

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches
 inches
 ft

The minimum length for this tube is 10 feet. We have rounded the length.
Please call us at (888) 768-5759 for special length.

Please Call us at (888) 768-5759 for pricing.

Overview Specs & Uses Reviews Inquiry
UHMNE - Overview

UHMW tube orders over 8 feet will be cut to not exceed 8 feet. Please call to request specific lengths.

UHMW polyethylene is an outstanding choice in material when you need a relatively low cost abrasion, impact, and chemical resistant material. UHMW is used in extreme wear situations such as hopper liners, conveyer systems, marine fender pads, and sand and gravel movement. UHMW is not UV stabilized and will have a shortened life if used outdoors. For outdoor situations, use IPX UHMW as an alternative.

Sold in ten foot increments but may be cut for UPS.



Features
[PDF Spec Sheet]

NOTE: ALL TUBES COME SUFFICENTLY OVERSIZED ON THE OD DIMENSION AND SUFFICENTLY UNDERSIZED ON THE INSIDE DIMENSION TO ALLOW FOR MACHINING TO SIZE LISTED

• Meets USDA and FDA 3-A dairy guidelines

• Custom colors available

• No cold embrittlement, works from -155ºF to + 200ºF

• Impervious to marine borers and barnacle resistant

• Extremely high abrasion resistance

• Outstanding impact strength, even at low temperatures

• Extremely low coefficient of friction

• Self-lubricating

• Easily machined with common woodworking tools

• Great chemical resistance

NEED A UHMW SAMPLE?
Machinable Plastics Material Sample Pack
Impact Strength Material Sample Pack
Friction Resistance Material Sample Pack




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 david.h@interstateplastics.com
Career