Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

0.5" NYLON ALLTHREAD ROD - NATURAL
 MouseOver to Zoom.


0.5" NYLON ALLTHREAD ROD - NATURAL

Lightweight, non-toxic rod for broad range of applications.




Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches
 inches

Please Call us at (888) 768-5759 for pricing.

Overview Specs & Uses Reviews Inquiry
NYLNMA6RA - Overview

Nylon Allthread is a strong yet lightweight rod that features threads along its entire length. This nonconductive plastic provides resistance to abrasion, corrosion, and many chemicals and solvents. Nylon can either absorb or lose moisture, which may alter its dimensions and mechanical properties.



Nylon Allthread rod is inert, non-toxic, tasteless, weather resistant, non-aging, non-sparking, mechanically stable, non-flammable and will not support combustion. It supports a maximum temperature of 200°F. Nylon Allthread rods proves excellent for use in chemical industry, oil refineries, food processing, and marine applications.

Features

• Strong

• Lightweight

• Provides resistance to abrasion, corrosion, harsh weather, and most chemicals and solvents

• Non-toxic

• Mechanically stable

• Non-flammable




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 jessica.p@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!