| MouseOver to Zoom.
HOME > ABS - FR > THERMOFORMING
ABS MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER
Multi-Pack Sheets of .060x12x12" White ABS Sheets
5 stars based on 2 Review(s)
|Get Your Online Pricing:
Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy [X]
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Compatible Polycarbonate Disinfectants:
• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes
Compatible Acrylic Disinfectants:
• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)
[Download as a PDF]
|As low as $2/month with
The ABS Bundle Pack includes multiple 12x12" sheets of white ABS plastic in a thickness of 0.060".
ABS (Acrylonitrile Butadiene Styrene) plastic is ideal for when excellent rigidity, hardness and heat resistance are required. This thermoplastic is produced in varying grades for a wide range of features and applications. ABS plastic can be processed by any of the standard thermoplastic processing methods and is easily machined.
Tough and Rigid
ABS plastic is known for its toughness, rigid thermoplasticity and strength. ABS is easily machined and ideal for turning, drilling, milling, sawing, die-cutting and shearing. ABS can be cut with standard at-home power tools, and line bent with standard heat strips.
ABS is heat resistant and impact resistant. It performs well at low temperatures and operates under a wide temperature range and low heat conductivity. ABS also has high chemical, corrosion and abrasion-resistance, and a good dimensional stability.
High Chemical Resistance
ABS parts are resistant to many materials and chemicals, making it versatile and usable in many conditions.
ABS plastics are used in thermoforming applications where heat-induced flexibility and physical appearance are preferred. Its high-impact resistance in combination with hardcell-textured surface makes ABS plastics ideal for consumers in need of an attractive faceplate.
[PDF Spec Sheet]
- Easily machinable and fabricated
- Tough and rigid
- High impact and strength
- Performs at low temperatures
- Low heat conductivity
- High corrosion and abrasion resistance
- Low coefficient of friction
- High chemical resistance
- Desirable electrical insulation properties
- Desirable dimensional stability
WARNING: This product can expose you to chemicals including Acrylonitrile, CAS 107-13-1, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Styrene, CAS 100-42-5, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.