Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

ACETAL ROD - 13% AF BLEND
 MouseOver to Zoom.


ACETAL ROD - 13% AF BLEND

Polyoxymethylene, Polyacetal



 4 stars based on 8 Review(s)
Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches





Total Price: $12.79

 ft


Overview Specs & Uses Reviews Inquiry
ACEAE1 - Overview

Acetal AF blend, supplied as a 2:1 blend of Acetal AF-100 and Acetal 150 resins, has excellent sliding/friction properties. Bearings made of Acetal AF blend can operate at higher speeds while exhibiting reduced wear. These bearings are also essentially free of slip-stick behavior because the static and dynamic coefficient of friction are closer than with most plastics. Acetal AF blend retains 90% of the strength that is inherent in unmodified Acetal. Some properties are changed due to the addition of the softer PTFE fiber. The natural color of Acetal AF blend is dark brown.



Features

[PDF Spec Sheet]

  • High hardness and stiffness
  • Very high mechanical properties
  • Excellent creep resistance and dimensional stability
  • Excellent dielectrical properties
  • Low coefficient of friction

NEED AN ACETAL SAMPLE?

Thermoplastics Material Sample Pack

Machinable Plastics Material Sample Pack

Tensile Strength Material Sample Pack

Friction Resistance Material Sample Pack




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 david.h@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!