BEARINGS - SPLIT PILLOW BLOCK | MEDIUM DUTY - OIL FILLED NYLON - IDLER BORE

MouseOver to Zoom.

BEARINGS - SPLIT PILLOW BLOCK | MEDIUM DUTY - OIL FILLED NYLON - IDLER BORE

Machined Split Pillow Block Bearings, Medium Duty, Nylon

Please Call us at (916) 679-5146 for pricing.

As low as $9/month with

PMCSBNFM - Overview

Polymer block bearings are self-aligning and corrosion resistant. Bearings are dimensionally interchangeable with industry-standard metallic units. They are available in oil-filled nylon or food-grade nylon for higher speeds and loads and in UHMW for highly caustic applications. Medium duty, split pillow block bearings are available in various sizes.

Features

Image Key

ID = Inner Diameter
OD = Outer Diameter
LTB = Length Through Bore

Material Warnings

WARNING: This product can expose you to chemicals including N,N-Dimethylformamide, CAS 68-12-2, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including METHYLPYRROLIDONE, CAS 872-50-4, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.