Clear Polycarbonate Post-Consumer Sheet
Magnifier MouseOver to Zoom.


Clear Polycarbonate Post-Consumer Sheet Image 2


Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

Polycarbonate Sheet | Clear

Composite Lumber & Deck Boards

Acrylic Sheet | Clear Cast Paper-Masked

HDPE Sheet | Natural High Density Polyethylene

HOME > POLYCARBONATE

Clear Polycarbonate Post-Consumer Sheet

Clear polycarbonate Renovo-MPC is a sustainable post-consumer sheet with the same benefits as extruded polycarbonate.


Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


Width
 
inches
Length
 
inches
Thickness:
 
inches
Quantity:
 
 
Price per Sheet: $22.49

Total Price: $22.49
Options:
Rounded/Chamfered Edges (45 degrees): ($8)
Rounded Corners (in.): 
#Holes Per Sheet ($2/hole) - Please upload your drawing:
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

As low as $2/month with Credit Key

Overview Specs & Uses Reviews Inquiry
POLCER SH - Overview

Renovo-MPC clear polycarbonate is a tough sheet material with outstanding strength, stiffness, and impact resistance. Made from reclaimed post-consumer and industrial polycarbonate, Renovo-MPC is fully sustainable while retaining the properties of general-purpose extruded polycarbonate, including its outstanding optical clarity, high light transmission and low haze. Renovo-MPC is a closed loop material that is lightweight, shatter-resistant, and has a higher impact resistance than glass. Like general-purpose polycarbonate, this material may be thermoformed, sawed, routed, drilled, and is hot and cold bendable.

Renovo-MPC is manufactured in the U.S. and may be used toward LEED Materials and Resources credits in some applications.



Features

[PDF Spec Sheet]

  • Tough, fully sustainable sheet
  • Closed loop post-consumer polycarbonate that retains all of general-purpose polycarbonate's properties
  • Excellent optical clarity
  • May be routed, drilled, and sawed
  • Thermoformable
  • Cold and hot bendable
  • Screen printable
  • Dimensionally stable
  • Usable toward LEED credits in some applications
  • Made in the U.S.A.


Material Warnings

Material Warning WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers