| MouseOver to Zoom.|
HOME > SNEEZE GUARDS AND SHIELDS
Custom Sneeze Guard
Cut-to-size protective desktop barriers with rounded corners
|Get Your Online Pricing:
Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy [X]
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Compatible Polycarbonate Disinfectants:
• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes
Compatible Acrylic Disinfectants:
• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)
[Download as a PDF]
|As low as $4/month with |
American-made & available to ship in 5-7 business days (transit time not included) from one of our 10 nationwide locations.
Custom sneeze guards share all the same features of standard desktop sneeze guards, but are available in non-standard dimensions to suit any size desk or table. Custom size pass-through slots are available - please put the desired dimensions of your pass-through slot in the slot size box of the cut-to-size calculator.
All sneeze guard dimensions will be nominal ±1/8".
For standard options, please see our desktop sneeze guards and vertical guards.
See More Protective Barrier Products »
Custom Sneeze Guard Information [PDF]
Custom Sneeze Guard Assembly Instructions [PDF]
Sneeze Guard & Safety Barrier Information [PDF]
Sanitizing Acrylic, Polycarbonate, & PETG Sheets [PDF]
- All the qualities of a desktop sneeze guard
- Comprised of clear and durable plastic materials
- Custom pass-through slot also available - specify desired dimensions in slot size comment box
- Made in the U.S.A.
Custom Sneeze Guard Dimensions
RETURN POLICY: Personal protection equipment (PPE) and barriers (PPB) are non-returnable and non-refundable. PPE and PPB products include, but are not limited to, "sneeze guards", "protective barriers", "cashier panels", "office barriers", as well as "guards" and "shields". For items damaged during shipping, please make a claim with the shipping company within 7 days from receipt of the delivery date. Please give the claim number to an Interstate Plastics representative at (916) 679-5146 so that the issue can be further examined and the appropriate actions are taken. For more information, please read our full shipping and returns policy.
WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.