Desktop Sneeze Guard
 MouseOver to Zoom.






You Might Also be Interested In

Sneeze Guard Cleaner and Disinfectant Kit | Guardsy®

Custom Sneeze Guard

Portable Office Barriers

Vertical Sneeze Guard

Portable Divider Wall | Sneeze Guard Office Table Dividers

HOME > SNEEZE GUARDS AND SHIELDS

Desktop Sneeze Guard

Portable Vertical Protective Shield with rounded corners

 5 stars based on 1 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

  1/8" x 23.5" x 31.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  1/8" x 23.5" x 35.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  1/8" x 23.5" x 31.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
  1/8" x 23.5" x 35.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
  1/4" x 23.5" x 31.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  1/4" x 23.5" x 35.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  1/4" x 23.5" x 31.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
  1/4" x 23.5" x 35.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
  3/8" x 23.5" x 31.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  3/8" x 23.5" x 35.5" Acrylic Guard | 1" tall x 18" wide pass-through slot
  3/8" x 23.5" x 31.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
  3/8" x 23.5" x 35.5" Polycarbonate Guard | 1" tall x 18" wide pass-through slot
Order Now - the Shipping is included!

Save with our Volume Pricing:
QuantityPrice Each
10->19$61.75
20->49$58.5
50+$55.25
 

Total Price: $65.00


In Stock, Ready to Ship!



Overview Specs & Uses Reviews Inquiry
Date Review
2020-04-25Fantastic product came early and was easy to assemble!
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
5ea33     
Enter the code above:



Interstate Plastics Suppliers