Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

DURATRON® CU60 PBI SHEET

Wear resistance and load bearing capacity at extreme temperatures.



Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Please Call us at (888) 768-5759 for pricing.
Duratron® CU60 PBI Sheet

Overview Specs & Uses Reviews Inquiry
PBIBC SH - Overview

Developed by Quadrant, Duratron® PBI is a high performance engineering thermoplastic that offers the highest heat resistance and mechanical property retention (over 400°F) of any unfilled plastic. Duratron® PBI features better wear resistance and load bearing capacity at extreme temperatures versus any other reinforced or unreinfornced engineering plastic.

As an unreinforced material, Duratron® PBI is considered to be "clean" in terms of ionic impurity and does not outgas, which makes it a great material for semiconductor and vacuum forming applications. Duratron° PBI has excellent transparency, which makes it an ideal choice for parts including probe tip lenses in ultrasonic measuring equipment.

Duratron® PBI's excellent thermal insulation and resistance to stick make it an ideal material for contact seals and insulator bushings.



Features

  • Highest mechanical properties of any plastic above 400°F (204°C)
  • Excellent wear resistance
  • Superior load bearing capacity
  • Resistant to outgassing (except for water)
  • Highest heat deflection temperature 800°F (427°C), with a continuous service capability of 750°F (399°C)
  • Lowest coefficient of thermal expansion and highest compressive strength of all unfilled plastics

Applications

  • High heat insulator bushings
  • Electrical connectors for aircraft engines
  • Ball valve seats for high temperature fluid handling
  • Clamp rings for gas plasma etching equipment
  • Probe tip lenses
  • Ultrasonic measuring equipment
  • Contact seals




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 dennis.g@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!