Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

DURATRON® PAI SHEET

High-performing, amorphous plastic that features excellent resistance to high temperatures.



 5 stars based on 1 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers youll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Please Call us at (888) 768-5759 for pricing.
Duratron® PAI Sheet - Call for Pricing

Overview Specs & Uses Reviews Inquiry
PAIBC SH - Overview

Duratron® PAI is a high-performing, melt-processing amorphous plastic that features excellent resistance to high temperatures. Duratron® PAI survives extreme weather conditions including continuous temperatures up to 500 F (260 C). Duratron® PAI's extremely low coefficient of thermal expansion and elevated creep resistance offer excellent dimensional stability.

With versatile performance capabilities and availability in extruded, injection molded and compression molded grades, Duratron® PAI has proven use in a broad range of industries and applications. Parts machined from Duratron® stock shapes provide greater compression strength and higher impact resistance versus most advanced engineering plastics.

Benefits of Compression Molded Grade
Popular extrusion and injection molded grades of Duratron® PAI are offered as compression molded shapes. (Note: Compression molded grades are usually identified as having a second digit of "5" in the product name.)

For large shapes or custom geometries like tubular bar, compression molded Duratron® PAI shapes offers customers the greatest cost-efficiency and flexibility. Another benefit of selecting a compression molded grade is that resins are cured, or "imidized" prior to molding which eliminates the need to post-cure shapes or parts fabricated from compression molded shapes.



Features

  • Maintains strength and stiffness to 500 F (260 C)
  • Minimal expansion rate to 500 F (260 C)
  • Excellent wear resistance in bearing grades
  • Able to endure harsh thermal, chemical and stress conditions




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 jessica.p@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!