Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

HOME > PVC TYPE I

FLAMETEC THERMAX PVC

Fire and Heat Resistant Material



Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Please Call us at (888) 768-5759 for pricing.
kit option

Overview Specs & Uses Reviews Inquiry
THERMAX_FLAMETEC - Overview

Interstate Plastics now offers Flamtec® Thermax PVC by Vycom, designed to meet Factory Mutual (FM) 4910 fire propagation and smoke generation criteria for cleanroom equipment materials such as wet benches, process tools, fume hoods, furniture and cabinetry. These criteria reduce threats to worker safety and damage to semiconductor wafers used in electronic chip manufacturing. Flametec® Thermax provides a flame-retardant PVC solution with excellent workability and superior aesthetics. It is available in a smooth, white finish, in various sheet sizes and thicknesses.

Flametec® Thermax PVC is very easy to fabricate and weld. It has optimal mechanical properties at service temperatures up to 170F, high chemical resistance and heat deflection surpassing that of standard PVC.

In addition to FM 4910, Flametec® Thermax PVC also meets UL-94 V-0, ASTM E-84 and is RoHS and REACH compliance.



Features

  • Easy to fabricate
  • Easily weldable
  • Surpasses standard PVC temperature resistances
  • FM 4910 listed




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Career

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
aaron.j@interstateplastics.com
TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!