FLANGE BEARINGS | 2 BOLT (OIL FILLED NYLON)

MouseOver to Zoom.

FLANGE BEARINGS | 2 BOLT (OIL FILLED NYLON)

Nylon Machined Two Bolt Flange Bearings

Please Call us at (916) 679-5146 for pricing.

As low as $9/month with

PMCSBNFU2 - Overview

Flange bearings are available in two standard materials: oil-filled nylon and natural or virgin UHMW. In corrosion sensitive applications, UHMW is the preferred material, however, oil-filled nylon has a huge advantage in load bearing capability. Both materials are routinely used in food contact applications where wash-down and lubricity are concerns.

Features

Nylon plastics reduce energy loss and are used for long life wear parts.

Image Key

ID = Inner Diameter
OD = Outer Diameter
LTB = Length Through Bore

Material Warnings

WARNING: This product can expose you to chemicals including N,N-Dimethylformamide, CAS 68-12-2, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including METHYLPYRROLIDONE, CAS 872-50-4, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.