Food Inspection Block
Magnifier MouseOver to Zoom.


Food Inspection Block Image 2


Google Reviews
HOME > SNEEZE GUARDS AND SHIELDS

Food Inspection Block

Protective plastic block for use during individual product inspections


Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

  19" x 19" x 15" Small Food Inspection Block
  20" x 20" x 16" Medium Food Inspection Block
  21" x 21" x 17" Large Food Inspection Block
  Food Inspection Block: Small, Medium, and Large Kit

Save with our Volume Pricing:
QuantityPrice Each
10->19$228
20->49$216
50+$204
 

Total Price: $240.00


Add to Cart
As low as $22/month with Credit Key

Overview Specs & Uses Reviews Inquiry
MACHFOODBLOCK - Overview

American-made & ready to ship from one of our 10 nationwide locations.

For more sensitive or thorough product inspections, the food inspection block allows employees to safely access and inspect food products with minimal risk of contamination. Two pre-cut holes for arms on the side of the inspection block allow free movement of arms for the food inspection process. It is lightweight and can be picked up and easily moved anywhere. The food inspection block can be used together with food safety shields for extra protection of both employees and food products and comes pre-assembled as a single unit.

Food inspection blocks are made of clear, durable plastic materials that have greater impact resistance than glass. Cleaning them is simple - any non-abrasive cleaner will do. See our recommendations for cleaning and disinfecting sneeze guards and similar products.



Features

More Information on Food Inspection Blocks & Other Meat Packaging Products ?

Sneeze Guard & Safety Barrier Product Information [PDF]

  • Designed to allow access to food products with minimal risk of food contamination
  • Two pre-cut holes for arms allow free movement
  • Lightweight and portable block design

Food Inspection Block Diagrams

Small

Medium

Large

RETURN POLICY: Personal protection equipment (PPE) and barriers (PPB) are non-returnable and non-refundable. PPE and PPB products include, but are not limited to, "sneeze guards", "protective barriers", "cashier panels", "office barriers", as well as "guards" and "shields". For items damaged during shipping, please make a claim with the shipping company within 7 days from receipt of the delivery date. Please give the claim number to an Interstate Plastics representative at (916) 679-5146 so that the issue can be further examined and the appropriate actions are taken. For more information, please read our full shipping and returns policy.



Material Warnings

Material Warning WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more information go to?www.P65Warnings.ca.gov.

Material Warning WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers