Foster<sup>®</sup> First Defense Disinfectant - 32oz

MouseOver to Zoom.

Foster^® First Defense Disinfectant - 32oz

Hospital-Grade 4080 Disinfectant

Get Your Online Pricing:

Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]

Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

As low as $0.61/month with Credit Key

MSCEA4080DISINFECTANT - Overview

We recommend Foster^® First Defense^? 4080 Disinfectant for safely disinfecting sneeze guards without causing long term damage. It can be used on all hard non-porous surfaces, including glass and plastic, and is approved by the EPA for use against COVID-19. Hospital-grade Foster^® First Defense^? 4080 Disinfectant comes ready-to-use with no mixing required.

Foster^® First Defense^? 4080 disinfectant also inhibits mold and mildew growth and can remove the lingering odors caused by flooding or smoke.

Features

Foster^® First Defense^? Disinfectant Information [PDF]

Recommended disinfectant for sneeze guards and protective barrier applications
Safe for use on plastic and glass surfaces
Ready-to-use bleach-free solution with no mixing required
All-in-one disinfectant, fungicide, and virucide*
Inhibits mold and mildew growth
Will not cause long-term damage such as crazing or cracking
EPA List N approved for use against SARS-CoV-2 (COVID-19)
Unlike diluted bleach, will retain full strength for its shelf life
Non-corrosive
Low odor solution
Removes lingering smoke or flooding odors

*Please refer to Specs and Uses for the list of viruses Foster^® First Defense^? is effective against.

Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Foster^® First Defense^? 4080 Disinfectant works on all hard non-porous surfaces and is effective against COVID-19, norovirus, and the influenza virus.

DIRECTIONS FOR DISINFECTION, FUNGICIDAL, VIRUCIDAL, MOLD & MILDEW CONTROL: Apply undiluted First Defense^? 4080 to hard, non-porous surfaces, thoroughly wetting the surfaces with a cloth, mop, sponge, sprayer, or by immersion. Treated surfaces must remain wet for a minimum of 10 minutes. For Influenza Virus Type A and Human Coronavirus, treated surfaces must remain wet for 1 minute. Wipe dry with a clean cloth, sponge, or mop - or allow surfaces to air dry. For heavily spoiled areas, a preliminary cleaning is required. For sprayer applications, use a coarse spray device. Protective eyewear is recommended when using a spray device. Spray 6-8 inches from surface and rub with a brush, sponge, or cloth. Avoid breathing spray. Using potable water, thoroughly rinse all surfaces that come in contact with food such as countertops, appliances, tables, and stovetops. Do not use on utensils, glassware, or dishes.

FIRST AID MEASURES

IF IN EYES: Flush eyes with plenty of water for at least 20 minutes retracting eyelids often. Tilt the head to prevent chemical from transferring to the uncontaminated eye. Get immediate medical attention.

IF ON SKIN: Wash with soap and water.

IF INHALED: Remove individual to fresh air after an airborne exposure if any symptoms develop, as a precautionary measure.

IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care provider with a 4080 safety data sheet. Induced vomiting may lead to aspiration of the material into the lungs potentially causing chemical pneumonitis that may be fatal.

Effective against the following viruses: *Hepatitis B Virus (HBV), *Hepatitis C Virus (HCV), *Herpes Simplex Virus Type 1, *Herpes Simplex Virus Type 2, *HIV-1 (AIDS virus), *Human Coronavirus, *Influenza Virus Type A/ Brazil Influenza, *Influenza Virus Type A/ Hong Kong Influenza, *2013 Influenza A Virus (H7N9), *Norwalk Virus (Norovirus), *Respiratory Syncytial Virus (RSV), *Rotavirus, *SARS Associated Coronavirus (SARS), *Vaccinia (Pox Virus) - This product has demonstrated effectiveness against influenza A virus and is expected to inactivate all influenza A viruses including Pandemic 2009 H1N1 influenza A virus.

Foster® First Defense Disinfectant - 32oz