Flange bearings are available in two standard materials: oil-filled nylon and natural or virgin UHMW. In corrosion sensitive applications, UHMW is the preferred material, however, oil-filled nylon has a huge advantage in load bearing capability. Both materials are routinely used in food contact applications where wash-down and lubricity are concerns. All of our block bearing products match their metal counterparts for height, centerline and bolt patterns and are, therefore, interchangeable dimensionally.
Call for custom sizes. FDA/USDA approved.
Features
Interstate Advanced Materials carries a wide selection of Hi Solidur replacement parts.
Molded Four Bolt Flange Bearings with Oil Filled UHMW Insert.
Image Key
ID = Inner Diameter
OD = Outer Diameter
LTB = Length Through Bore
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Interstate Advanced Materials provides power transmission solutions including gears, bearings, sprockets, and conveyor system parts.
Write Your Own Review
FOUR BOLT FLANGE - FDA - USDA | W/OIL-FILLED UHMW INSERT Questions?