G10 Glass Epoxy Laminate Sheet
Magnifier MouseOver to Zoom.

Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

G-10/FR4 Glass Epoxy Sheet

G-10/FR4 Glass Epoxy Sheet | Black

G11 Phenolic Sheet | Glass Epoxy High Temperature Plastic

G10 FR4 | Phenolic Rod | FR4 G10 Rod


G10 Glass Epoxy Laminate Sheet

Non-flame retardant glass epoxy composite sheet

Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]

Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

Price per Sheet: $18.58

Total Price: $18.58

As low as $2/month with Credit Key

Overview Specs & Uses Reviews Inquiry

G10 glass epoxy laminate phenolic sheet is a versatile material composed of layers of glass cloth saturated with an epoxy resin. It has great mechanical strength, stiffness, and resistance to chemicals. G10 phenolic exhibits excellent electrical properties but is non-flame retardant. For flame retardant properties, see our G10/FR4 glass epoxy composite sheet.

Superb Mechanical Properties

G10 phenolic is a dimensionally stable sheet with a great combination of mechanical strength and stiffness that will remain relatively consistent across a wide range of temperatures, making it suitable for use in both hot and cold environments. It offers high tensile strength, compressive strength, and good flexural strength, allowing it to keep its shape even when subjected to forces that will pull, squeeze, or bend the sheet. Unlike its successor, G10/FR4, G10 phenolic is not flame retardant and should not be used for applications requiring flame resistance.

Electrically Insulating

Phenolic G10 has excellent electrical properties. A high dielectric strength enables it to withstand electrical currents without breaking down, and its low dissipation factor and dielectric constant ensures minimal loss and distortion in signal transmission. G10 can be used as a material for printed circuit boards and is frequently used as insulation or in electrical enclosures and other electronic components.

Great Chemical Resistance

G10 exhibits remarkable chemical resistance, making it suitable for applications where exposure to harsh chemicals is prevalent. It resists a wide range of chemicals, including acids, bases, solvents, and oils. This resistance prevents degradation or deterioration of the material when exposed to such substances, ensuring long-term durability and reliability in challenging environments. G10's chemical resistance makes it a preferred material choice in a number of industries where corrosion is a concern, including the chemical processing, marine, and automotive industries.

  • Superb mechanical properties - dimensionally stable
  • Low dissipation factor
  • Low moisture absorption
  • High tensile, flexural, and impact strength
  • Excellent resistance to chemicals
  • Not flame retardant
  • Operates over a wide range of temperatures

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Interstate Plastics Suppliers