Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

HALAR ECTFE 901 SHEET
 MouseOver to Zoom.


HOME > ECTFE - HALAR

HALAR ECTFE 901 SHEET

Ethylene and Chlorotrifluoroethylene (Copolymer)



 5 stars based on 4 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

ECTFE 901 Sheet .090" x 48" x 96"$1,049.00
ECTFE 901 Sheet .125" x 48" x 96"$1,450.00
ECTFE 901 Sheet .25" x 48" x 96"$2,920.00
ECTFE 901 Sheet .5" x 48" x 96"$5,830.00
ECTFE 901 Sheet .787" x 48" x 67"$6,760.00
ECTFE 901 Sheet .787" x 48" x 96"$9,200.00
ECTFE 901 Sheet 1" x 48" x 96"$11,700.00
 

Total Price: $1,049.00

 

Overview Specs & Uses Reviews Inquiry
ACTNE SH - Overview

Halar ECTFE (901), a copolymer of ethylene and chlorotrifluoroethylene, is a very versatile polymer with excellent resistance to abrasion, harsh chemicals, and permeation. For those applications exceeding the capabilities of PVDF, Halar ECTFE can be evaluated before resorting to a fully fluorinated polymer.

These characteristics have made Halar ECTFE a material of choice for several applications for corrosion protection in semiconductor, chemical processing, pharmaceutical, and microelectronics industries. Excellent processability, together with desirable electrical properties, has allowed Halar ECTFE to become an ideal solution for wire and cable insulation.



Features

  • Versatile polymer
  • Resistant to abrasion
  • Good chemical resistance
  • Good resistance to permeation




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Career

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
aaron.j@interstateplastics.com
TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!