HDPE COLORCORE<sup>®</sup> | BLUE/WHITE/BLUE
Magnifier MouseOver to Zoom.


HDPE COLORCORE<sup>®</sup> | BLUE/WHITE/BLUE Image 2HDPE COLORCORE<sup>®</sup> | BLUE/WHITE/BLUE Image 3HDPE COLORCORE<sup>®</sup> | BLUE/WHITE/BLUE Image 4


Google Reviews

You Might Also be Interested In

HDPE COLORCORE® | RED/WHITE/RED

HDPE COLORCORE® | GREEN/WHITE/GREEN

HDPE COLORCORE® | GREEN/TAN/GREEN

PALBOARD® CO-EXTRUDED MULTILAYER PVC SHEET

HDU Precision Board PBLT-15 | High Density Urethane Foam Board And Sign Board

HOME > HDPE - ENGRAVING

HDPE COLORCORE® | BLUE/WHITE/BLUE

ColorCore® High-density polyethylene (HDPE)

5 stars 5 stars based on 6 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


Width
 
inches
Length
 
inches
Thickness:
 
inches
Quantity:
 
 
Price per Sheet: $249.88

Total Price: $249.88
Options:
Rounded/Chamfered Edges (45 degrees): ($48)
Rounded Corners (in.): 
#Holes Per Sheet ($2/hole) - Please upload your drawing:
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

As low as $23/month with Credit Key

Overview Specs & Uses Reviews Inquiry
Date Review
2016-01-08We used ColorCore for signage at the Riverdale Yacht Club. They are very visible and hold up to the salt water very well. We used both the red and the blue cap, and found the blue cap to be a bit more aesthetically pleasing.
2014-06-11True to color, it's like what you would see on the tic-tac-toe board on a childrens playground, same exact stuff. It's easy to CNC route and makes great easy to read signs.
2014-06-11True to color, it's like what you would see on the tic-tac-toe board on a childrens playground, same exact stuff. It's easy to CNC route and makes great easy to read signs.
2014-04-17A great signage material that takes to CNC routing well. Arrived a little scuffed at the edge but nothing too bad. 4/5
2014-03-28the colorcore plastic was as described, dimensions correct with a pleasant texture finish. It arrived soon after I ordered it and works great for signage with a simple router.
2013-11-13Used this material to make a pic-nic table for kids. It was easy to cut and drill. Should hold up to extreme weather as well as any damage from the kids.
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
8fc64     
Enter the code above:



Interstate Plastics Suppliers