As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
King StarBoard® XL is a lighter, more economical version of the popular King StarBoard®.
This 100% virgin marine-grade polymer has a high density polyethylene cap and a closed cellular inner core which has an excellent surface finish that looks good enough to use in high-visibility applications where structural strength and a finished edge are not important. King StarBoard® XL sheets are up to 30% lighter in weight than King StarBoard, and are made with the same textured surface and colors for a perfect match.
As with King StarBoard®, King StarBoard® XL is made with the exclusive K-Stran® process for superior consistency and flatness, and has a thickness tolerance of plus or minus 5% (unlike ordinary polymer sheets that use 10% as an acceptable tolerance).
Fabricating and finishing King Starboard XL is easy with standard woodworking tools. King Starboard XL forms easily for smooth curves and bends. Since there is no grain pattern, parts can be cut from any part of the sheet, virtually eliminating waste (meaning greater economy versus wood).
King Starboard is specially formulated to withstand the rigors of harsh outdoor marine environments. It is UV-stabilized to resist damage and retain its beauty, even after years of direct sunlight. It does not splinter, crack, delaminate, rot, swell, or absorb water like traditional materials. Even under heavy foot traffic on yacht decks, it remains virtually maintenance-free. In addition, there is no need to stain or paint.
Features
Warm colors, rot resistance, UV inhibitors, and ease of fabrication make King Starboard® XL the material of choice for cabinetry. It can be machined and worked just like wood with woodworking tools.
Resistant to rotting, swelling, splintering and delaminate
Environmentally stabilized for harsh sun and marine environments
Resistant to odor, acid, alcohol and bases
Easy to clean
Matte-textured finish on both sides
Material Warnings
WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.