HDPE SHEET | NATURAL CUTTING BOARD
Magnifier MouseOver to Zoom.


HDPE SHEET | NATURAL CUTTING BOARD Image 2HDPE SHEET | NATURAL CUTTING BOARD Image 3


Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

HDPE Cutting Board Material | Black Cutting Board Plastic

HDPE Colored Cutting Board | Green

HDPE Colored Cutting Board | Blue

HDPE Colored Cutting Board | Yellow

HOME > HDPE

HDPE SHEET | NATURAL CUTTING BOARD

5 stars 5 stars based on 13 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


Width
 
inches
Length
 
inches
Thickness:
 
inches
Quantity:
 
 
Price per Sheet: $23.86

Total Price: $23.86
Options:
Rounded/Chamfered Edges (45 degrees): ($8)
Rounded Corners (in.): 
#Holes Per Sheet ($2/hole) - Please upload your drawing:
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

As low as $2/month with Credit Key

Overview Specs & Uses Reviews Inquiry
Date Review
2016-11-04Thanks! Great products and prices, and super fast shipping for me on a full sheet.
2016-10-25Ordered online and it went well. No hassle company.
2016-09-29The material was very good and they did a good job updating me on the status of my order. But it did take a while and after the initial confirmation email I had to call in twice to confirm it would be delivered the next day, which indeed it was.
2016-06-14Well packaged and easy to order. We needed to order a few odds and ends, the cut calculator they have lets you add each to the cart very easily.
2016-04-19It took a lot of back and fourth to get this order together. Honestly is was a bit of an ordeal. In the end we got the material we needed. Shipping was a bit on the high side, but it arrived in good condition.
2016-03-01Stellar product that can really hold up and doesn't stain like my last board.
2015-12-22Great cutting board that doesn't dull my blades! Top quality and very affordable.
2015-02-02Clean and high quality cutting board for our commercial kitchens. High resistance to staining and it is fda compliant. We were very satisfied in Interstate Plastics getting our order right the first time.
2014-10-23We had the entire kitchen redone sourcing our cutting board from interstate plastics. We were very happy with the results and thanks to your entire team for being so attentive, friendly and in-the-know.
2013-02-04We use this in my culinary class. Decided to get one for myself. I like thats its inexpensive.
2013-01-14I like the texture of these. Food particles don't get trapped, easy to clean.
2013-01-11This is the second one of these boards I've owned. Several years ago the Restaurants were made to get rid of all wooden cutting boards, because of bacteria being able to live on the wood surfaces where normal washing couldn't get to. Good quality.
2012-12-20the HDPE has excellent corrosion resistance and absolutely incredible moisture resistance. Cannot be cemented but is easily welded with a hot air plastic welder.
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
40848     
Enter the code above:



Interstate Plastics Suppliers