KEL-F<sup>®</sup> PCTFE SHEET
Magnifier MouseOver to Zoom.





Google Reviews

You Might Also be Interested In

KEL-F® PCTFE Rod

HOME > PCTFE - KELF

KEL-F® PCTFE SHEET

Polychlorotrifluoroethylene, Kel-F®, Neoflon®

2 stars 2 stars based on 2 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

Please Call us at (916) 679-5146 for pricing.
Kel-F® PCTFE Sheet
All sizes over 24in x 48in will be shipped by a commercial freight carrier
As low as $14/month with Credit Key

Overview Specs & Uses Reviews Inquiry
PCTNE SH - Overview

***Due to severe market volatility, pricing and availability of PCTFE products will be confirmed back in 24 to 48 hours. Please contact our sales team for any updates and questions you may have.***

Kel-F® PCTFE plastic sheet features high compressive strength, low deformation under load and stability within a wide thermal range. PTCFE is commonly used for cryogenic and chemical processing components, seals and gaskets, aerospace valve seats, pump parts, impellers, diaphragms and plugs, nuclear service/high radiation exposure, liquid oxygen and liquid nitrogen valve linings, and laboratory instruments.

PCTFE meets the following classifications:

  • ASTM D 1430-89 Type 1 Grade 2
  • ASTM D 1430-95 Type 1 Grade 3
  • ASTM D 1430-03 Group 1, Class 1, Grade 3
  • Mil-P-46036B
  • AMS 3650C
  • AMS 3645C
  • ASTM D 7211-06 (Section 8.9)
  • D 7194-05 (Section 8.10)
  • L-P 385C



Features

  • Dimensionally stable, rigid, resistant to cold flow
  • Very low gas permeation and outgassing
  • Near zero moisture absorption
  • Excellent chemical resistance
  • High compressive strength
  • Low deformation under load
  • Non-flammable
  • Useful temperature range: -400?F to +380?F
  • FDA compliant
  • Radiation resistance



Material Warnings

Material Warning WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause cancer. For more information go to?www.P65Warnings.ca.gov.

Material Warning WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers