Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

NYLON GS SHEET
 MouseOver to Zoom.






You Might Also be Interested In

NYLATRON NYLON NSM CAST SHEET

NYLON - GRAY MD NYLON TUBE

NYLON - NATURAL CAST SHEET

NYLON - NATURAL EXTRUDED SHEET

NYLATRON NYLON NSM CAST SHEET

NYLON GS SHEET

Molybdenum disulphide (MoS2) filled nylon



 3 stars based on 4 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches Price per Sheet: $49.70


Total Price: $49.70
 inches
 inches


Overview Specs & Uses Reviews Inquiry
NYLMEM SH - Overview

Nylatron GS is a nylon and molybdenum disulphide (MoS2) composition, designed to improve the mechanical, thermal and bearing properties of type 6/6 nylon while maintaining its basic electrical and chemical characteristics.

Nylatron GS offers greater wear resistance, lower surface friction, greater strength and rigidity versus unfilled 6/6 nylon with improved dimensional stability. Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylatron GS parts to operate with little to no lubrication. The added lubricity also contributes dramatically to component service-life, making Nylatron GS a very cost-effective choice compared to alternatives. Nylon GS parts maintain better fit and clearances and have less tendency to seize than bearings.



Features

  • Self-lubricating
  • Good mechanical and electrical properties
  • Provides extended service-life
  • Cost-effective
  • Excellent wear resistance
  • Low surface-friction
  • Excellent strength and rigidity
  • Improved dimensional stability versus unfilled 6/6 nylon
  • Textured versus GSM




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 bruce@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!