NYLON PLASTIC MATERIAL | NYLON 6 6 EXTRUDED SHEET
Magnifier MouseOver to Zoom.


NYLON PLASTIC MATERIAL | NYLON 6 6 EXTRUDED SHEET Image 2


Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

NYLON ROD | EXTRUDED ROUND MD NYLON 66 ROD

NYLON SHEET | GS GRADE

NYLON | NATURAL CAST NYLON STOCK SHEET

HYDLAR Z PLASTIC NYLON SHEET | POLYAMIDE 66 ABRASION RESISTANT PLASTIC

HOME > NYLON

NYLON PLASTIC MATERIAL | NYLON 6 6 EXTRUDED SHEET

Nylon Plastic Material Type 6/6 Extrusion Grade

5 stars 5 stars based on 9 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


Width
 
inches
Length
 
inches
Thickness:
 
inches
Quantity:
 
 
Price per Sheet: $25.15

Total Price: $25.15
Options:
Rounded/Chamfered Edges (45 degrees): ($8)
Rounded Corners (in.): 
#Holes Per Sheet ($2/hole) - Please upload your drawing:
Available hole sizes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16”, 7/8”, 15/16”, and 1”

As low as $2/month with Credit Key

Overview Specs & Uses Reviews Inquiry
Date Review
2016-12-15Got this with a 5% off code, made it a real good deal. Will do business with again! A+
2016-09-27We were and are quite impressed with the service you provided. We will be back, thank you!
2016-07-25Really nice cuts on the sheet. There no flaking. Shipping took a few days longer than expected.
2016-04-26Was really pleased with the ordering process until I saw shipping. It's not cheap by any means. I called to confirm it's correct they say shipping full sheets can cost more than the sheet to begin with.
2015-11-19I'm still waiting on my material to arrive and it's been a week. Last time it took only 3 days. Now they tell me it could take 3 days to cut.
2014-09-09I think we got cast nylon sheet? We are waiting to confirm... It may be a screw up, but I suppose in our favor.
2014-07-11Had to call in for pricing, but good customer service. Picks up on the first ring. Slow shipping. Good product. Will buy again!
2014-07-01Great for machined parts. We tried acetal and were told it was a better choice, but I like the nylon better for gears and bearings. Fast shipping, low minimums, longish lead time, good service.
2014-03-20We have used IPs Nylon for years. They do not give you the runaround like some other suppliers and the material is top notch at a good price.
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
9f787     
Enter the code above:



Interstate Plastics Suppliers