Outrigger Pad | Heavy Duty | 2 in. Thick
Magnifier MouseOver to Zoom.


Outrigger Pad | Heavy Duty | 2 in. Thick Image 2Outrigger Pad | Heavy Duty | 2 in. Thick Image 3


Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

Outrigger Pad | Heavy Duty | 1.5 in. Thick

Outrigger Pad | Heavy Duty | 2.5 in. Thick

Outrigger Pad | Heavy Duty | 3 in. Thick

Outrigger Pad | Heavy Duty | 1 in. Thick

HOME > UHMW

Outrigger Pad | Heavy Duty | 2 in. Thick

Our line of outrigger and jack pads will exceed your requirements.

4 stars 4 stars based on 2 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


 

Total Price: $100.80


Add to Cart
As low as $9/month with Credit Key

Overview Specs & Uses Reviews Inquiry
MAX200 - Overview

Our line of outrigger and jack pads will exceed your requirements. Outrigger pads made from plywood tend to splinter, can rot over time, hold moisture, and need to be replaced more often than Interstate Plastics outrigger pads. Steel and aluminum pads are heavy, corrode, discolor, are difficult to replace and expensive to purchase and maintain.

Lifetime replacement if you break this pad!



Features

Standard color is black. Many colors available.

[DOWNLOAD PDF OVERVIEW]

  • Virtually unbreakable
  • Compressive loads up to 2500 pounds per square inch
  • Works in sub zero temperatures
  • Waterproof and will not rust
  • Easy to mount and replace
  • Reduced downtime
  • Only 15% the weight of steel
  • Chemically inert
  • Serviceable from 180°F to -250°F
  • Non-stick surface
  • Easy to clean



WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers