As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Palboard® is a new multi-layer PVC sheet composed of both smooth and foam PVC for signage applications. It has been tested and approved by the world's largest digital printer and cutting system manufacturers. Palboard® comes in two different types: Palboard® 3D and Palboard® 2D.
Palboard® 3D is three layer PVC that has white, rigid, ultra-smooth PVC surfaces with a black foam PVC core. The rigid exteriors offer better structural strength than standard foam PVC and easier workability than aluminum composite panels. We offer Palboard® 3D in White/Black/White and White/White/White colors.
Palboard® 2D is two layer PVC that has a white, solid, ultra-smooth PVC surface with a black foam PVC back. This makes it ideal for signage requiring attractive black edges and back. Like Palboard® 3D, its uniform smooth surface is bright white to provide vibrant color reproduction. Palboard® 2D is a perfect complement to Palboard® 3D displays. We offer Palboard® 2D in White/Black.
Easy to fabricate and thermoform; can be cold-formed with v-cuts
Ultra-smooth and uniform surface that resists dents and scratches
EverClean™ protective film is standard, one side
Excellent ink adhesion and white index for vibrant color reproduction
Recycled lightweight foam PVC core
High structural strength with a relatively low weight
Excellent chemical and fire resistance
Strong electrical and thermal insulation
Material Warnings
WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Palboard® is versatile and is used in a wide variety of signage applications, including:
WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
