As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
The Palclad™ Pro HYG PVC Wall Cladding System combines flat PVC panels with color-matched welding rods for a seamless finish. Its impact and chemical resistance makes it ideal for use in hospitals, sterile/clean rooms, pharmaceutical facilities, laboratories, and clinics. Thanks to its active antimicrobial nature, the Palclad™ Pro HYG system ensures many years of service that won't be affected by frequent cleaning. It is available in a variety of colors, including white, beige, blue, and green, as well as matte and glossy finishes.
Main Benefits
Complete cladding solution with color-matched welding rods
Multiple colors & surfaces for a variety of design possibilities
Excellent for environments with high sanitation requirements
Silver ion-infused proprietary blend distributed to the core of the panel, providing equally effective antimicrobial resistance for scratched or damaged surfaces.
Kills or inhibits the growth of a wide variety of pathogens including MRSA and VRE, as well as mold and fungi.
High-impact resistant surface protects from scratching, dents, and harsh chemicals
Easy to install and maintain
Tested to JIS Z 2801/ISO 22196 Standards
Class A fire rating
Certified lead free
Additives used in Palclad Pro HYG are registered with the EPA, FDA, and BPR (Biocidal Products Regulation)
Material Warnings
WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Palclad™ Pro HYG wall panels are used in a wide variety of applications, including:
Public Facilities
Schools
Restrooms
Airports
Public transportation facilities
Corridors
Food Industry
Food plants
Food preparation areas
Sorting halls
Storage/refrigeration rooms
Healthcare
Pre-op
Sterile/clean rooms
Hospital corridors and rooms
PACU
laboratories
Clinics
Pharmaceutical plants
Agriculture
Livestock and dairy farms
Egg sorting halls
Storage rooms
Refrigeration facilities
Write Your Own Review
Palclad Pro PVC Wall Cladding System Panel | White Questions?