As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
PEEK is high temperature-resistant engineered thermoplastic with excellent chemical and fatigue resistance and thermal stability. PEEK exhibits superior mechanical and electrical properties with a maximum continuous working temperature of 480?F and excellent retention of mechanical properties up to 570?F in a steam or high-pressure water environment. Superior chemical resistance has allowed PEEK to work effectively as a metal/stainless steel replacement in harsh environments and has proven to be a reliable replacement for other materials that cost up to 10 times more. PEEK is inert to all common solvents and resists a wide range of organic and inorganic liquids. This is a versatile high-performance plastic.
PEEK was one of the first high-performance commodity products available.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Because of its robustness, PEEK is used to fabricate items used in demanding applications where extreme heat, pressure, and chemicals come into play.
Compressor plate valves
Chemical process applications
good condition and price. shipping time was reasonable. ordered online.
the perfect high heat plastic. came with minimal scuffs and was easy to work with. looked new, not like it had been sitting. reasonable price
Solid product, arrived undamaged. A great insulator. Thank you.
We are a fabricator of medical devices and frequently need to restock our PEEK supply. We love your prices, services and products. You are very dependable and we appreciate that.
Been in the machining industry working with PEEK for 10 plus years, with dozens of suppliers. Interstate has proven to have the most consistent pricing and easily the easiest purchasing system.
Love the new pallets. Never had a damaged sheet.
While PEEK is certainly not inexpensive, all of Interstate Plastics products are outstanding and come shipped safely.