Providing Solutions in Plastics interstate Plastics

(888) 768-5759

Plastic experts
available to assist you:
8AM-5PM PST Mon-Fri
Get a Quote
Buy More,
Save More!

UHMW Plastic
Log In >>
Total: $0 (0 item)

 MouseOver to Zoom.



Vivak® - Polyethylene Terephthalate Glycol

 3 stars based on 6 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches Price per Sheet: $63.50

Total Price: $63.50

Purchase a 0.060" x 12" x 12" sample: $19.99

All sizes over 24in x 48in will be shipped by a commercial freight carrier

Overview Specs & Uses Reviews Inquiry
PTGCE SH - Overview

Performing as the industry leader for PETG (Polyethylene Terephthalate Glycol) products, PETG Vivak® is a transparent thermoplastic known well for its excellent impact and chemical resistances. PETG Vivak® features a high impact resistance than surpasses acrylic products and also remains much more cost-effective versus polycarbonate products. PETG Vivak® offers complete die-cuts, deep draws and precise molded-in details without affecting the product's structural integrity. PETG Vivak® is easy to fabricate, form, bond or decorate, and is well-suited for a variety of point-of-purchase and sign applications. PETG Vivak® performs well under forming temperatures ranging from 250°F to 320°F and is approved for use by the Food and Drug Administration.

Easily Fabricated and Decorated
PETG Vivak® features a durable, lightweight construction that allows simple and flexible fabricating, forming and finishing. PETG Vivak® die-cuts and punches easily and can be bonded or fastened with adhesives, ultrasonic welding or rivets. It can also be easily decorated by painting, silk screening or hot stamping. PETG Vivak® is commonly used in the point-of-purchase display and store fixture industry.

Vivak® sheets are made of PETG raw material. They are light, extremely resistant to breaking, and highly transparent.


[PDF Product Information Sheet]

Excellent transparency and high gloss surface Easily fabricated Consistent transparency Cost-effective High Impact resistance, similar to polycarbonate Break elongation similar to polycarbonate Easily thermoformable Excellent chemical resistance Reduces sound transmission Able to be sterilized easily

Physical Properties of Vivak® PETG
Specific Gravity1.27
Tensile Strength7700 psi
Tensile Modulus320 ksi
Flexural Strength11200 psi
Flexural Modulus310 ksi
Rockwell HardnessR115
Water Absorption 24H0.2%
Izod Impact, Notched (ft-lb/in.)1.7
Heat Deflection Temp. @ 263psi157F
Forming Temperature280-320F
Light Transmission86%

Material Warnings

 WARNING: This product can expose you to chemicals including Antimony trioxide, CAS 1309-64-4, which are known to the State of California to cause cancer. For more information go to

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

About Us
Privacy Policy
Terms & Conditions
Shipping & Returns

Need Help?
Contact Us
Advanced Search

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
Interstate PlasticsInterstate Plastics