As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Performing as the industry leader for PETG (Polyethylene Terephthalate Glycol) products, PETG Vivak® is a transparent thermoplastic known well for its excellent impact and chemical resistances. PETG Vivak® features a high impact resistance that surpasses acrylic products and also remains much more cost-effective versus polycarbonate products. PETG Vivak® offers complete die-cuts, deep draws and precise molded-in details without affecting the product's structural integrity. PETG Vivak® is easy to fabricate, form, bond or decorate, and is well-suited for a variety of point-of-purchase and sign applications. PETG Vivak® performs well under forming temperatures ranging from 250�F to 320�F and is approved for use by the Food and Drug Administration.
Easily Fabricated and Decorated PETG Vivak® features a durable, lightweight construction that allows simple and flexible fabricating, forming and finishing. PETG Vivak® die-cuts and punches easily and can be bonded or fastened with adhesives, ultrasonic welding or rivets. It can also be easily decorated by painting, silk screening or hot stamping. PETG Vivak® is commonly used in the point-of-purchase display and store fixture industry.
Transparency Vivak® sheets are made of PETG raw material. They are light, extremely resistant to breaking, and highly transparent.
WARNING: This product can expose you to chemicals including Antimony trioxide, CAS 1309-64-4, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Greeting card displays
Revolving merchandise racks
Point-of- purchase displays
Slat wall inventory displays
Gets the job done, thanks folks!
Very clear, optically great to look at. Also works fairly well as a sound buffer.
Great for our wine displays, excellent optical properties and it just looks great.
Perfect! Arrived with no scratches and the sales team was helpful in making sure I needed this over other clear plastics. They are quite knowledgeable about explaining how plastic is used.
I am using this order to make a cloud chamber. I have a nine year boy and his mother now living with me. I want to develop a science interest in the boys mind. Currently he has too much time on video games. Wait until he looks at a vapor trail left by an electron. My first order to another company was cancelled after two days because it didn,t cost enough. I placed the same order with Interstate and I received it and for less money.
I bought a sheet to replace a cracked sheet on a vending machine that some kids broke...material arrived cracked due to shipping but customer service addressed right away and got me a replacement sheet super quick.