POLYCARBONATE CLEAR EXTRUDED DIVIDE H CHANNEL #201
 MouseOver to Zoom.





HOME > POLYCARBONATE

POLYCARBONATE CLEAR EXTRUDED DIVIDE H CHANNEL #201

For use with .236" (6mm) Polycarbonate Twinwall - 12 FT.



 5 stars based on 3 Review(s)
Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Clear Divide H Channel #201 (12 FT.)
Quantity:


Total Price: $27.45
 
As low as $3/month with

Overview Specs & Uses Reviews Inquiry
Date Review
2017-03-13A big thanks to David for helping me sift through the channels and finding the one I needed. Shipping took a few days longer + the weekend than I was expecting but it was not such a big deal. Everything else was on point.
2014-12-04A good collection of H channels for poly twinwall
2014-01-13Interstate carries a solid collection of profiles for polycarb
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
c3cf7     
Enter the code above:



Interstate Plastics Suppliers