Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

POLYCARBONATE MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER
 MouseOver to Zoom.


HOME > POLYCARBONATE

POLYCARBONATE MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

Multi-Pack Sheets of .060x12x12"" Clear Polycarbonate Sheets



Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

5 PACK - .060x12x12" Clear Polycarbonate Sheets$30.35
10 PACK - .060x12x12" Clear Polycarbonate Sheets$46.22
20 PACK - .060x12x12" Clear Polycarbonate Sheets$74.51
 

Total Price: $30.35

 

Overview Specs & Uses Reviews Inquiry
THERMOFORMPACKPOLCE12x12x060 - Overview

Polycarbonate is a versatile, tough plastic used for a variety of applications, from bulletproof windows to compact disks (CDs). It comes in transparent and opaque varieties. The main advantage of polycarbonate over other types of plastic is unbeatable strength combined with light weight. Polycarbonate is much lighter than glass, and is nearly unbreakable.

Polycarbonate is a versatile and very tough plastic used in endless applications that require unbeatable strength combined with light weight. Polycarbonate is just 1/3rd the weight of acrylic and 1/6th the weight of glass. Polycarbonate is nearly unbreakable.

With the thermoFORM system, Polycarbonate plastic sheet is heated to a pliable forming temperature and shaped in a mold. The Polycarbonate Bundle Pack includes multiple 12x12" sheets of white Polycarbonate clear plastic in a thickness of 0.060", perfect for use with the ThermoFORM Vacuum Forming System.

How to Clean Polycarbonate Sheet

General Cleaning
1. Rinse surface with warm water to loosen preexisting dust, dirt and grime.
2. Gently wash surface with a mild soap and a soft microfiber cloth or sponge.
3. Rinse thoroughly with lukewarm water. Dry completely with a soft, dry cloth.

Removing Oil and Tar
1. Rinse with warm water to loosen preexisting dust, dirt and grime.
2. Gently rub surface with a 50/50 isopropyl alcohol and water mixture using a soft, non-abrasive cloth.
3. Immediately rinse material with water and dry using a soft, dry cloth.

Removing Heavy Markings (e.g. graffiti, paint, marker, inks, glazing components)
1. Rinse with warm water to loosen preexisting dust, dirt and grime.
2. Gently rub surface with Naphtha VM&P grade, isopropyl Alcohol, or butyl cellosolve, using a soft, non-abrasive cloth.

Removing Adhesive-Backed Labels
1. Stubborn adhesives can be removed using isopropyl alcohol, Naphtha VM&P grade or kerosene.

Removing Scratches
1. Deep scratches and gouges made by sharp objects such as keys, screwdrivers and knives cannot be repaired.
2. Fine scratches can be cosmetically hidden by using our Novus 2, followed by a polishing agent such as Novus 1.

Special Note: Always rinse edges of polycarbonate with generous amounts of warm water, as the edges of polycarbonate sheet are not protected with an abrasion and chemical resistance hard coating.



Features

  • Prototyping
  • Architectural Design
  • Model Making
  • Signage
  • Repairing & Replacing Plastic Parts
  • Tabletop Gaming
  • Costume Design
  • Quick Molds for Jello, Chocolate, Soap, Candles, etc.
  • Making Just About Anything!



Material Warnings

 WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Career

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
emailsales@interstateplastics.com
TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!