POLYCARBONATE ROD | NATURAL MACHINE GRADE
 MouseOver to Zoom.






You Might Also be Interested In

POLYCARBONATE SHEET | NATURAL MACHINE GRADE

Clear Polycarbonate Post-Consumer Sheet

POLYCARBONATE SHEET | CLEAR AR2

Polycarbonate Sheet | Black

POLYCARBONATE TUBE | CLEAR

HOME > POLYCARBONATE

POLYCARBONATE ROD | NATURAL MACHINE GRADE

Machine Grade Polycarbonate



 5 stars based on 5 Review(s)
Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).




Outside Diameter:

 inches
Length:

 ft
Quantity:



Total Price: $12.79
Cut to 4 foot lengths for optimum shipping. If you need a specific length, please advise your representative.

As low as $1/month with

Overview Specs & Uses Reviews Inquiry
Date Review
2017-02-14Another great order. Very much appreciated.
2016-07-25Didn't have the size I needed online but gave em a quick call and they helped me right out.
2014-12-01Great prices. Easy to order, great selection. I would recommend that you add what "machine grade" means in terms of your polycarbonate rod. I was used to acrylic rod with a smooth surface. Your spec. and picture are incomplete. Also, your ordering diameter was 4.000 inches which typically means +/-0.005" The rod comes in at 4.080 and is quite rough with small gouges (none deeper than the 4" dia. I do like your convenience and I will be back to buy again.
2013-07-26Shipped very securely, however a day later than expected. Great product, great price.
2012-10-04The material arrived damaged due to freight and needless to say, I was very displeased. However customer service expedited out replacements and I can say I will order again.
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
4f692     
Enter the code above:



Interstate Plastics Suppliers