Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

POLYCARBONATE ROD - NATURAL MACHINE GRADE
 MouseOver to Zoom.






You Might Also be Interested In

POLYCARBONATE SHEET - GRAY #7130

POLYCARBONATE TUBE - CLEAR

POLYCARBONATE SHEET - CLEAR AR2

POLYCARBONATE SHEET - NATURAL MACHINE GRADE

POLYCARBONATE SHEET - GRAY #7130

POLYCARBONATE ROD - NATURAL MACHINE GRADE

Machine Grade Polycarbonate



 5 stars based on 5 Review(s)
Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches





Total Price: $12.79

 ft
Cut to 4 foot lengths for optimum shipping. If you need a specific length, please advise your representative.


Overview Specs & Uses Reviews Inquiry
POLNE - Overview

Machine grade Polycarbonate engineering rod features extremely high impact strength, outstanding dimensional stability, and the lowest internal stress and inclusion levels when compared to any other products in its class. The lower internal stress and reduced inclusion levels of this polycarbonate will save you time and money by reducing your fabrication process. Machine grade Polycarbonate is an excellent material for prototyping parts before injection molding.

Polycarbonate is a versatile, tough plastic used for a variety of applications, from bulletproof windows to compact disks



Features

[PDF Spec Sheet]

  • Virtually unbreakable with extreme impact resistance
  • High dielectric strength
  • Easily machinable
  • Transparent up to 2" thick
  • Wide temperature operating range (-40F to 280F)
  • Lightweight

NEED A POLYCARBONATE SAMPLE?

Thermoplastics Material Sample Pack

Impact Strength Material Sample Pack




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 dennis.g@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!