Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

POLYGAL TOPGAL PANEL SYSTEM

Superior rigidity and thermal insulation in a broad range of wall-panel applications.



Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Please Call us at (888) 768-5759 for pricing.
Polygal Topgal Panel System - Call for Pricing

Overview Specs & Uses Reviews Inquiry
POLTOPGAL SH - Overview

Developed by Quadrant, Polygal's Topgal standing-seam panel system was developed to offer superior rigidity and thermal insulation in a broad range of wall-panel applications. Topgal panels feature the same world-renowned properties of the original Polygal multi-structure panels.

Topgal is manufactured in thicknesses of 8mm - 10mm in 23.62" width as well as 16mm - 20 mm in 39.37" width. Topgal panels are available in standard colors as well as special color layers that reflect solar radiation.

Depending on the requirement of the application, standard Topgal panels are available with UV protection on one or both sides. The panel system comes equipped with all necessary components required for easy installation.



Features

  • Endless design possibilities
  • Excellent thermal insulation
  • Highly flexible, yet virtually unbreakable
  • Lightweight and easy-to-install
  • Rigid sheet structure provides extra strength under wind and snow loads




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime Gravityscan Badge
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 bruce@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!