As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Polypropylene is a high corrosion resistant material which exhibits excellent tensile strength and stiffness at elevated temperatures. Homopolymer polypropylene possesses excellent resistance to organic solvents and degreasing agents as well as electrolytic attack.
Polypropylene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles (e.g. wicking clothing, ropes, thermal underwear and carpets), stationery, reusable containers, laboratory equipment, animal enclosures, loudspeakers, automotive components, and polymer banknotes. It is rugged, light weight, abrasion resistant, and has high strength. Polypropylene is also good at transporting moisture and extremely resistant to many chemical solvents, bases and acids. Polypropylene is available in fluted, sheet, and medical grade forms, and comes in a variety of colors.
WARNING: This product can expose you to chemicals including Ethylene Oxide, CAS 75-21-8, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Ethylene Oxide, CAS 75-21-8, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Piping systems: high purity, high rigidity, potable plumbing, hydronic heating and cooling, reclaimed water
Living hinges
Plastic containers, esp. in medical applications
Lids
Disposable bottles
Pails
Automotive batteries
Pharmacy prescription bottles
Clear bags
Carpets, rugs and mats
Waterproofing
Moldings and fittings
Packaging and storage boxes
Trading card protectors
Date
Review
2021-11-08
Smooth transaction, big thanks to Aaron for all his help.
2017-06-12
Way overpriced. About 4x the going rate.
2016-05-16
No Next Day or 2 Day Shipping!
2016-04-05
Very cost effective and from a great company made in the USA!
2014-05-19
Perfect homopolymer polypro - thank you.
2013-11-20
We love the cut to size options. Saves us a lot of hassle. Cuts come out clean too.
2013-02-25
Interstate plastics is our go to source for polypro. cant beat this price!
Write Your Own Review
Polypropylene Homopolymer SR Sheet | Natural Questions?
3 stars based on 7 Review(s)
WARNING: This product can expose you to chemicals including Ethylene Oxide, CAS 75-21-8, which are known to the State of California to cause cancer. For more information go to 
WARNING: This product can expose you to chemicals including Ethylene Oxide, CAS 75-21-8, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to 
