PPS Sheet | Natural
Magnifier MouseOver to Zoom.





Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

Techtron® HPV PPS | Bearing Grade PPS

PPS Rod | Natural

HOME > PPS - POLYPHENYLENE SULFIDE

PPS Sheet | Natural

Polyphenylene Sulfide, Techtron® PPS

5 stars 5 stars based on 6 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


 

Total Price: $478.78


Add to Cart
As low as $44/month with Credit Key

Overview Specs & Uses Reviews Inquiry
PPSNE SH - Overview

Polyphenylene Sulfide sheet and rod, otherwise known as PPS and also sold under Quadrant's brand Techtron® PPS, is a partially crystalline material that offers high mechanical performance and excellent heat and chemical resistance, with service temperatures that range up to 464? F. Excellent hardness, rigidity, dimensional stability and creep resistance make PPS a popular material in industrial, construction and automotive industries.

Due to impressive strength and cost-effectiveness, PPS bridges the gap between partially crystalline materials and PEEK plastic. Generic PPS sheet and rod comes available in virgin (unfilled) or 40% glass-filled grades.

Features

Due to high strength and rigidity, PPS and Techtron® PPS sheet and rod are commonly used as components in equipment construction, pump parts, fan elements, impellers, valve balls/seats/seals and motor vehicle parts. PPS is many times used as an alternative to aluminum, steel, and other high-temperature thermoplastics used in forming large shaped parts.

  • Excellent strength and hardness
  • Very high rigidity
  • Resistance to chemicals and high heat deformation
  • High dimensional stability
  • Very good electrical insulation properties
  • High resistance to the effects of weather, near zero moisture absorption
  • High hydrolysis resistance in the case of non-reinforced types



WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers