PTFE Rods | Mechanical
 MouseOver to Zoom.






You Might Also be Interested In

Interstate Advanced Materials Membership

PTFE | Virgin Extruded Natural PTFE Sheeting

PTFE Sheet | Natural Virgin Grade

Halar® ECTFE 901 Sheet

HOME > PTFE - PTFE

PTFE Rods | Mechanical

PTFE, Polytetrafluoroethylene



  4 stars based on 4 Review(s)
Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Feet:     
Choose cut option:
 
 

Total Price: $1.33


As low as $0.12/month with

Overview Specs & Uses Reviews Inquiry
TFENEM - Overview

PTFE, or Polytetrafluoroethylene, is a fluoropolymer that is resistant to heat and chemicals. PTFE is inert to mostly all chemicals and is considered the slipperiest material in existence. It has an extremely low coefficient of friction, and is used as a coating on cookware, gaskets, seals, and hoses. It is unaffected by virtually all acids and caustics, functioning in environments up to 500°F, and as low as -350°F. Virgin PTFE is approved by the Food and Drug Administration for use in the food, beverage, cosmetics and pharmaceutical industries.



Features

[PDF Spec Sheet]

  • Extremely low co-efficient of friction
  • Excellent chemical and weather resistance
  • Great electrical insulator
  • Great thermal stability and operating temperature range
  • Resistant to chemicals and moisture
  • FDA approved for food handling (Virgin)

NEED A PTFE SAMPLE?
Thermoplastics Material Sample Pack
Machinable Plastics Material Sample Pack
Friction Resistance Material Sample Pack
Extreme Temperatures Material Sample Pack



Material Warnings

Material Warning  WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers