Providing Solutions in Plastics

   (888) 768-5759

      Request Account »

      Tax Exempt Orders »

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
Get A Quote
Buy More,
Save More!
TOTAL: $0 (0 Item)

PTFE - Molded Natural Virgin Sheet
 MouseOver to Zoom.

You Might Also be Interested In

Onsrud - Plastic Router Bits

Friction Resistance Material Sample Pack

PTFE - Extruded Natural Virgin Sheet


PTFE - Molded Natural Virgin Sheet

PTFE, Polytetrafluoroethylene

 5 stars based on 1 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

1.) Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
2.) Measure your space by counting the increments beyond the nearest inch. (If your space measures 7 inches plus 8 tick marks, that is 8/16 ΰ 1/2. Your space is 7-1/2" on one side.)
3.) Another example: If your space is 7 inches and 9 marks past that, your material should be 7-9/16".

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches Price per Sheet: $58.27

Total Price: $58.27

Purchase a Molded PTFE 0.25" x 3" x 3" sample: $13.99

Benefit From Optimal Cut Size:
One sheet - 48 inches x 48 inches Only $461.54

Overview Specs & Uses Reviews Inquiry
TFENMV SH - Overview

PTFE, also known under the brand name Teflon®1, is a soft fluoropolymer mechanical plastic with exceptional resistance to high temperatures, chemicals, corrosion and stress cracking.

PTFE features impressive heat, mechanical toughness, electrical and low friction properties, making it the material of choice for many high heat and low friction applications.

PTFE plastic is available in FDA approved, electrical, mechanical, glass-filled and bearing grades.


PTFE is soft and formable, often used for chemically resistant seals and gaskets. With strong electrical properties, PTFE is also used in many aerospace and computer applications. Glass-filled PTFE has enhanced strength and stiffness properties.

• Bearings and bushings
• Gears
• Slide plates
• Gaskets
• Valve stem seals, valve seats
• Chute liners
• Pump parts
• Cable insulation
• Connector assemblies
• Electrical sleeves
• Semiconductor equipment
• Scientific, medical equipment
• Chemical resistant tubing
• Shims
• Oven plates
• Non-stick and release coating

PDF Material Properties and Specification Sheet

Thermoplastics Material Sample Pack
Machinable Plastics Material Sample Pack
Friction Resistance Material Sample Pack
Extreme Temperatures Material Sample Pack

1Teflon® is a registered trademark of E. I. du Pont de Nemours and Company.

About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
Need Help?
Contact Us
Advanced Search
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815