PTFE SHEET | NATURAL VIRGIN GRADE
Magnifier MouseOver to Zoom.





Google Reviews

You Might Also be Interested In

PTFE | VIRGIN EXTRUDED NATURAL PTFE SHEETING

HALAR® ECTFE 902 SHEET

Fluorosint 207 Enhanced PTFE Plate

PTFE ROD | VIRGIN POLYTETRAFLUOROETHYLENE

PTFE RODS | MECHANICAL

HOME > PTFE - PTFE

PTFE SHEET | NATURAL VIRGIN GRADE

PTFE, Polytetrafluoroethylene

5 stars 5 stars based on 11 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]


Width
 
inches
Length
 
inches
Thickness:
 
inches
Quantity:
 
 

We only carry the size you requested via special order.
Please call us at (916) 679-5146 for a quote.

The out-of-the-box maximum sheet size for a thickness of 0.125 is 9 x 48 or 48 x 9.


Please Call us at (916) 679-5146 for pricing.
Clearance pricing on .125 x 9 x 48 in. sheets! While supplies last.
As low as 0% for 30 days with Credit Key

Overview Specs & Uses Reviews Inquiry
Date Review
2016-02-19This is great material from a great and trusted supplier we will continue to use!
2015-12-22Great to work with the folks at Interstate who were very helpful in helping me pick this PTFE material. Works amazing!
2015-10-12A great product and great price. 5+
2015-01-06We found interstate plastics through Google and didn't realize just how helpful they were until they had put together quite a complex quote for us and helped find the right material. They were professional, kind, to the point and most importantly, they knew their stuff!
2014-12-19the ptfe is a reliable product/material from a reliable supplier.
2014-05-08As far as low friction plastics go, this is a winner. Really great for high heat environments and slide rails within an oven. Great material, great service.
2014-04-08Pro: Solid build quality Cons: Expensive
2014-04-02We use it not only for electrical insulators, but it also works well as a high heat barrier and the results are fabulous with a price that is great as well! We certainly recommend this product.
2014-03-10Same as Teflon at a way better price. EZ choice.
2013-04-24Thanks for your help and professionalism in getting us taken care of. We had contacted a previous PTFE Teflon supplier but could never get a quote with shipping charges to Hawaii, and government purchases are a bit more complicated with all numerical requirements. You were able to help us immediately, and we will certainly reach out to you for any future PTFE needs. Thanks again.
2012-09-27I bought a small sheet to use on my craft table on a recommendation to help the fabric slide easier, best extra money ever spent.
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
7d90c     
Enter the code above:



Interstate Plastics Suppliers