As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
PTFE is soft and formable, often used for chemically resistant seals and gaskets. With strong electrical properties, PTFE is also used in many aerospace and computer applications. Glass-filled PTFE has enhanced strength and stiffness properties.
1Teflon® is a registered trademark of E. I. du Pont de Nemours and Company.
WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Bearings and bushings
Valve stem seals, valve seats
Scientific, medical equipment
Chemical resistant tubing
Non-stick and release coating
This is great material from a great and trusted supplier we will continue to use!
Great to work with the folks at Interstate who were very helpful in helping me pick this PTFE material. Works amazing!
A great product and great price. 5+
We found interstate plastics through Google and didn't realize just how helpful they were until they had put together quite a complex quote for us and helped find the right material. They were professional, kind, to the point and most importantly, they knew their stuff!
the ptfe is a reliable product/material from a reliable supplier.
As far as low friction plastics go, this is a winner. Really great for high heat environments and slide rails within an oven. Great material, great service.
Pro: Solid build quality
We use it not only for electrical insulators, but it also works well as a high heat barrier and the results are fabulous with a price that is great as well! We certainly recommend this product.
Same as Teflon at a way better price. EZ choice.
Thanks for your help and professionalism in getting us taken care of. We had contacted a previous PTFE Teflon supplier but could never get a quote with shipping charges to Hawaii, and government purchases are a bit more complicated with all numerical requirements. You were able to help us immediately, and we will certainly reach out to you for any future PTFE needs. Thanks again.
I bought a small sheet to use on my craft table on a recommendation to help the fabric slide easier, best extra money ever spent.