SciGrip Weld-On 3 is a water-thin, non-flammable cement formulated to bond to many thermoplastic substrates, primarily acrylic. The bond is achieved by fusing the materials together with dissipation of the solvent. The initial bond forms within a few minutes and quickly increases in strength within only a few hours.
Under extreme conditions (primarily high humidity), a white mark on the plastic may appear, called
blushing." Where a more blush resistant cement and longer open time is required, SciGrip Weld-On 4 is recommended.
SciGrip Weld-On 3 is formulated for cementing acrylic (poly-methyl methacrylate) plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It is not recommended for cross-linked acrylic.THIS PRODUCT IS FOR INDUSTRIAL USE ONLY AND NOT
FOR CONSUMER USE AT HOMES OR SCHOOLS OR IN RECREATION
Download Sci-Grip Weld-On 3 MSDS Sheet [PDF]
Download Sci-Grip Cementing Instructions [PDF]
Adhesive products are non-returnable and all adhesive sales are final.
This product is available in gallon (3.785 liters), quart (946 ml), pint (473 ml) and 1/4 pint (118 ml/4 oz.) metal cans.
Sci-Grip Weld-On 3 is carefully evaluated to consistent high quality. Fourier transform infrared spectroscopy, gas chromatography, and additional in depth testing ensures each batch is manufactured to exacting standards.