STYRENE TEMPLATE SHEET KITS .030/.060
Magnifier MouseOver to Zoom.





Google Reviews

You Might Also be Interested In

Styrene High Impact Sheet | White

STYRENE MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

HOME > STYRENE

STYRENE TEMPLATE SHEET KITS .030/.060

Template Kit

5 stars 5 stars based on 2 Review(s)
Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

Please Call us at (916) 679-5146 for pricing.
  48 pcs .030 x 3" wide,1pt glue,2 applicator (All sizes over 24in x 48in will be shipped by a commercial freight carrier)
  36 pcs .030 x 4" wide,1pt glue,2 applicator (All sizes over 24in x 48in will be shipped by a commercial freight carrier)
  36 pcs .060 x 4" wide,1pt glue,2 applicator (All sizes over 24in x 48in will be shipped by a commercial freight carrier)
  48 pcs .060 x 3" wide,1pt glue,2 applicator (All sizes over 24in x 48in will be shipped by a commercial freight carrier)
As low as 0% for 30 days with Credit Key

Overview Specs & Uses Reviews Inquiry
STY03031 - Overview

***Due to severe market volatility on Styrene material, quoted pricing for these products are valid for 4-5 days from the quoted date and surcharges have been temporarily added into the cost. Pricing and delivery of these products will be confirmed back in 24 to 48 hours. Please contact our sales team for any updates and questions you may have.***

In the past, stone cutters have used such materials as door skins, and cardboard to make templates for stone cutting jobs. We have eliminated the need to use inaccurate and hard to use materials by utilizing strips of plastic that while rigid enough to ensure a good template, can be rolled up before and after fitting. This material can be cut with a utility knife and glued together using fast acting solvent adhesive. Simply cut to length, overlap, and glue.



Features

We sell these items in kits ensuring that you have all of your items you need to complete a job. Kits are composed of 48 x 96 sheets cut to the various widths, then rolled for convenience, applicator bottles for the adhesive and the adhesive itself.


With the 3" width kits you will receive 16, 32 or 48 pcs., depending on the kit number. With the 4" width kits you will receive 12, 24 or 36 pcs., depending on the kit number. If you prefer a different size than the ones listed, we can cut to any width you want with a 5 sheet minimum.



Material Warnings

Material Warning WARNING: This product can expose you to chemicals including 1,3-BUTADIENE, CAS 106-99-0, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Material Warning WARNING: This product can expose you to chemicals including Styrene, CAS 100-42-5, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to?www.P65Warnings.ca.gov.

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers