Providing Solutions in Plastics interstate Plastics

(888) 768-5759

Plastic experts
available to assist you:
8AM-5PM PST Mon-Fri
Get a Quote
Buy More,
Save More!

UHMW Plastic
Log In >>
Total: $0 (0 item)

 MouseOver to Zoom.



Ridge cap profiles for SunSky 9 and Sunsky 12

Get Your Online Pricing: Tips for measuring »
How To Measure | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Palram SunSky 12 Clear Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 12 White Opal Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 12 Soft White Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 9 Clear Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 9 White Opal Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 9 Soft White Ridge Cap (0.039" x 24" x 126")$68.45
Palram SunSky 12 Soft White Opal Ridge Cap (0.039" x 24" x 126")$68.45

Total Price: $68.45

Overview Specs & Uses Reviews Inquiry

SunSky has been designed specifically to match up to the most popular metal panel profiles, making it a perfect choice for seamless skylights, roof lights, and sidelights.

  • Matches virtually any profile
  • Virtually unbreakable
  • Self extinguishing
  • Resistant to yellowing
  • Retains optical clarity with high light transmission
  • Can handle extreme climates (-40F to 250F)
  • Easily and safely installed
  • ICC-ES Approved

Material Warnings

 WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

About Us
Privacy Policy
Terms & Conditions
Shipping & Returns

Need Help?
Contact Us
Advanced Search

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
Interstate PlasticsInterstate Plastics