SunTuf Red Brick Corrugated Polycarbonate
Magnifier MouseOver to Zoom.

SunTuf Red Brick Corrugated Polycarbonate Image 2SunTuf Red Brick Corrugated Polycarbonate Image 3

Google Reviews

You Might Also be Interested In

Interstate Advanced Materials Membership

SunTuf Polycarbonate Ridge Cap

SunTuf Polycarbonate Wall Connector

SunSky 12 Clear Corrugated Polycarbonate Sheet

SunTuf Clear Corrugated Polycarbonate


SunTuf Red Brick Corrugated Polycarbonate

High performance glazing panels for punishing exterior applications with a 3" trapezoidal corrugation.

Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]

Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

  SunTuf Red Brick 0.032" x 26" x 96"
  SunTuf Red Brick 0.032" x 49.6" x 96"
  SunTuf Red Brick 0.032" x 26" x 120"
  SunTuf Red Brick 0.032" x 26" x 144"
  SunTuf Red Brick 0.032" x 49.6" x 192"

Save with our Volume Pricing:
QuantityPrice Each

Total Price: $51.87

Add to Cart
As low as $5/month with Credit Key

Overview Specs & Uses Reviews Inquiry
POL0U3 - Overview

Note: Must be ordered in increments of 10. Orders of less than 10 sheets will be refunded.

SunTuf Corrugated Polycarbonate Panels are high performance glazing panels that stands up to punishing exterior applications. SunTuf offers multiple advantages over traditional fiberglass corrugated panels: up to 20 times greater impact resistance, the highest light transmission rates, the lowest yellowing index, the highest load rating, and the highest resistance to wind uplift-outstanding properties confirmed in accredited laboratory testing and in installations worldwide since 1984. Designed specifically to match up to the most popular metal panel profiles, SunTuf is used for skylights and sidelights. SunTuf features a 3" vertical corrugation pattern.

SunTuf installation is easy. Lightweight and super tough, use SunTuf to cover just about any type of outdoor structure for increased outdoor living area, storage, or shelter. Common applications include:

  • Skylights and sidelights
  • Architectural roofing
  • Industrial roof lights
  • Agricultural greenhouses
  • Car ports
  • Light roofing and awnings
  • Deck covers
  • Pool enclosures
  • Shade canopies
  • Animal shelters
  • Tool sheds
  • Walkway covers
  • Residential roofing: pergolas, canopies, patios, sun rooms, verandas, gazebos, etc.


SunTuf Technical Guide [PDF]

SunTuf Installation Guide [PDF]

  • Certain colors are transparent, with up to 90% light transmission
  • Extreme impact and weather resistance
  • Virtually unbreakable
  • Matches most metal panel profiles
  • Hail and wind resistant
  • Blocks 99.9% of harmful UV radiation
  • Will not yellow
  • Easy to work with and install with standard tools
  • Retains optical clarity far better than any other glazing material
  • Can handle extreme climates
  • Self extinguishing
  • Wide service temperature range: -40°F to 212°F
  • Lightweight: less than half the weight of glass
  • Good fire rating
  • 3" vertical corrugation pattern

Material Warnings

Material Warning WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Interstate Plastics Suppliers