Tivar<sup>®</sup> H.O.T. UHMW Rod
 MouseOver to Zoom.

You Might Also be Interested In

Interstate Advanced Materials Membership

Tivar® 88 UHMW Sheet

Tivar® DrySlide ESD Plastic | UHMW Engineering Plastic

Tivar® HPV UHMW Low Friction Sliding Material

UHMW IPX 2000® Sheet | Advanced Wear Technology


Tivar® H.O.T. UHMW Rod

Ideal for Performing Within Extreme Temperature Ranges

Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Please Call us at (916) 679-5146 for pricing.
TIVAR® H.O.T. UHMW Rod - Call for Pricing
As low as $0.09/month with

Overview Specs & Uses Reviews Inquiry
UHMARHOT - Overview

Designed to work well within an extreme temperature range, Tivar® H.O.T. performs in a variety of industrial manufacturing environments ranging up to 275°F. Featuring a temperature range nearly 100°F hotter versus other UHMW grades, Tivar® H.O.T. works to decrease oxidation of the material at higher temperatures, which extends part and wear life in chemical, high-temperate and thermo-cycling environments. In many applications, Tivar® H.O.T. will last up to ten times longer in higher temperature environments and has excellent wear and release characteristics versus competing UHMW grades.

TIVAR® H.O.T. is often used in poultry/meat and packaging industries for conveyor parts and other equipment that sees frequent chemical use. Tivar® H.O.T. rods can be used in applications ranging from wear strips for spiral conveyors in baking, and drag conveyor flights for moving bulk materials in grain elevators, to wear strips for conveyor dryers.

Tivar® H.O.T. is white and available in standard 10 foot lengths with 0.5" to 7" diameters.


[Tivar® H.O.T. Flyer]

[Tivar®H.O.T. Safety Data Sheet]

[Tivar®H.O.T. Material Spec Sheet]

  • Inhibits oxidation and extends material wear life
  • Extends operating temperature range
  • Abrasion, corrosion, chemical and moisture resistant
  • Excellent release characteristics
  • Meets FDA guidelines 21CFR 178.2010 and 21CFR 177.1520
  • FDA and USDA compliant

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Interstate Plastics Suppliers