Providing Solutions in Plastics

   (888) 768-5759

Request wholesale pricing »

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
TOTAL: $0 (0 Item)

TORLON SHEET - NATURAL 4203
 MouseOver to Zoom.






You Might Also be Interested In

TORLON ROD - NATURAL #4203

Onsrud - Plastic Router Bits

TORLON SHEET - NATURAL 4203

Polyamide-imide (PAI)




Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

1.) Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers youll find 16 equally spaced tick marks.
2.) Measure your space by counting the increments beyond the nearest inch. (If your space measures 7 inches plus 8 tick marks, that is 8/16 1/2. Your space is 7-1/2" on one side.)
3.) Another example: If your space is 7 inches and 9 marks past that, your material should be 7-9/16".

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 inches
 inches
 inches

Please Call us at (888) 768-5759 for pricing.

Overview Specs & Uses Reviews Inquiry
PAINT - Overview

Torlon is the highest performing melt processable plastic. It has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 500F (260C). Parts machined from Torlon stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics.

Torlon stock shapes are post-cured using procedures developed jointly by BP Amoco and Quadrant. This eliminates the need for additional curing by the end user in most situations. A post-curing cycle is sometimes recommended for components fabricated from extruded shapes where optimization of chemical resistance and/or wear performance is required.



Features

Exceptional toughness, stiffness, and strength

Extreme heat temperature resistance

Wear and creep resistant

Low coefficient of thermal expansion

Chemical resistance to strong acids and organics




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 bruce@interstateplastics.com
Career